The shifter will put the gear box in neutral if you hold it down but it will only go back into 3rd gear when u release the shift lever
SOURCE: i got a 1995 rm 250 that the gears are stuck.
Sorry to have to say this, you have a bent shift fork. The repair means taking the engine out of the frame then removing the top end, removing the flywheel and electrics, removing the clutch , shift mechanism and kick starter and a few other parts. THEN you are ready to split the gearbox to remove the crankshaft and then the bent shift fork. Next you get to put it all back together. This is a pretty big job for the home mechanic.
You will need an impact driver, flywheel puller, case splitter and torque wrench plus the normal screwdriver, pliers, etc.. Alternate to the special tools is taking it to the dealer and say "Fix it".
I normally tell people to take it to the shop just so they don't get into such an involved project.
Please rate this solution. Thanks
SOURCE: My bike is clutched
shift fork in trans is not engaging need to let someone open trans and sovle the issue those trans are not hard to fix but if you dont know how the shift fork needs to be to fuction seek pro help
SOURCE: Trouble starting RM 250
i got a 2000 rm 250 and it used to be a cow to kick over i used to spend at least 20 min kicking to start it until i rebuilt the top end with a new piston and rings now it starts on the fourth or fifth kick if that doesnt help you need a new cpu good luck!!!!
SOURCE: TS-250 Suziki Savage 1969 Shift rod moves in
If the shift pedal shaft does not spring back into position a problem with a spring is indicated. Your bike has two springs tied to shifting. The shaft spring and the index wheel spring. Both springs are still available at Babbitt's. Remove the left case cover and both springs are accessible after removing the clutch. A new gasket is also available.
Please rate this answer. Thanks!.
Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx
Testimonial: "Thanks for your help, this info has helped immensely."
SOURCE: When I shift my 02 GSXR 600 the gear shift lever gets stuck
Get yourself a repair manual and find out what it says, but I think you are correct, the return spring is either broken or it has slipped. Try this site for a freebie manual:
http://www.carlsalter.com/motorcycle-manuals.asp
452 views
Usually answered in minutes!
×