It looks like your picture that you post around that year!
SOURCE: Can you straighten torqued front forks on a 2002 Yamaha TTR 125 L
you should be able to saporrt bike so front wheel is off the ground then take a marker and put lines around where the forks meet the triple trees that hold them in place their should be some allen head bolts that u can loosen on front of the triple clamps once these are loose you should be able to move the forks back to strait again in line with the handle bars just line the lines up that u put on them earlier and tighten the allen bolts back up also when making the lines make them from left to right so marker is touching both fork tube and triple clamp this is only so you get can keep them the same ride hight as before
SOURCE: Looking to find age of yamaha bike using serial number
Get the vin number off the front downtube that the steering triple tree mounts to. Call a Yamaha dealer with the vin # and they can tell the year, engine size and model of bike.
Please rate this solution.
SOURCE: Will 2000 Yamaha R1main switch (iginition) fit an R6?
if the wiring diagram where the same it will work.
SOURCE: 2000 yamaha ttr 225..no powe
Trace the starter wire to the solenoid. Any loose connections? Check the other heavy wire to the solenoid. It should have power present at all times. If no click from the solenoid when the starter button is pressed, check the wiring connections coming from the handlebar. Lastly, look at the starter switch for possible damage from the spill.
SOURCE: looking for front mud gaurd for yamaha xt125x 2006 model
Go on line to E-bay, mc parts and you will find most of your parts.
Also try your nearest mc salvage. I get most of my parts from them.
Good luck
51 views
Usually answered in minutes!
×