Question about Suzuki Motorcycles
52 plate gs 125 how much oil and how to change seals in the fork @
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Noob begs for help with fork seal replacement on an EN125 2A
Suzuki GS500 Fork Seal Replacement
Suzuki GN125F Service Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Jan 19, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
White power allow a 110mm air gap with springs out and fork compressed as a general guide ,adjust from there according to prefrance . Thats probably,from memory about 600ml or so.If you overfill the leg ,cut the tip off the fork oil bottle , mark out on a clear piece of fuel hose 110 mm from one end of hose with a permanent marker, attach other end to the tip of the now empty fork oil bottle nipple, squeeze bottle,insert hose down to 110mm mark,take hand pressure off bottle and WWHHAAALLLAAA!!!!!!!!. Magically the excess oil is sucked back up into bottle.....Don't you just love the forces of nature. : ] ride on DB ......Hope this gets you out of trouble ....Flabbycat
Posted on Apr 17, 2009
If i were you i would not do this mod. You are going to end up with a ugly top triple tree. Rather find a lower set of bars off another bike. They are all the same diameter tubing.
Posted on Jul 07, 2009
Normally no. If the fork seals are leaking when you ratchet the front down on the trailer your seals were bad prior to that. If you are talking about the straps being wrapped around the forks the only thing that they would contact would be the dust covers. The fork seals are actually down inside the fork about 1/4 inch. Have a good day
Posted on Aug 12, 2009
Tips for a great answer:
Aug 24, 2016 | Suzuki Motorcycles
Jun 04, 2014 | 1979 Suzuki GS 750 E
Jan 21, 2013 | 1978 Suzuki GS 750 E
Aug 15, 2011 | 1978 Suzuki GS 750 E
Jun 03, 2011 | 1980 Suzuki GS 750 E
Jul 07, 2010 | 1983 Suzuki Gs 550 L
Nov 04, 2009 | 1978 Suzuki GS 750 E
Jul 21, 2009 | 1983 Suzuki Gs 550 L
Jun 26, 2009 | 1983 Suzuki Gs 550 L
Jun 09, 2009 | 1978 Suzuki GS 750 E
59 people viewed this question
Usually answered in minutes!