i doubt that one exists for a assembled bobber. but dude all you need are 3 wires on ignition switch 1 from the batt. 1 to the coil 1 to the lights if you want to rewire your bike (kick start only) very simple..1st post on the ignition switch (key switch), 1 wire, from the battery to the ignition. on the second post (key switch), 1 wire from the top post on the coil, (note on the bottom post of the coil another wire goes to your points), on the top post of the coil add 1 wire to one side of the brake light switch, then another wire from the other side of the brake light switch to the brake light, 3rd post (key switch), 2 more wires, 1 to the head light, 1 to the tail light (if you want high beam run a extra off the 3rd post to the hi lo switch then 1 from the hi lo switch to the head lights high beam wire)
last 1 wire from the regulator back to the battery.
you have just rewired your bike. if you have a electric starter then just add another from the 2cnd post (key switch) to the starter button, then 1 from the starter button back to the solenoid.
×