Check compression in front and rear cylinder
SOURCE: miss fire on cylinder 1 and 2 coils replaced
have u put a new set off leads on it as mite be brakeing down under pressure
SOURCE: 2002 escape miss fire on cylinder one
power not reaching cylinder 1 ignition coil. check electrical connections and wiring for any damage. test for power and ground at cylinder 1.
hope this helps.
SOURCE: Engine code states cylinder 2 misfire. Replaced
sounds like a bad injector, just connection at the injector, also check for leaks at intake, one more thing , do a compression test on that cylinder start there, good luck.
SOURCE: Coil pack only firing on front two cylinders on my
Did you try an ignition module?This could be your problem.Make sure you have good compression.
118 views
Usually answered in minutes!
×