The fork oil does not have anything to do with the kind of engine do you have, 2t or 4t. Doesn't matter.
You need to replace the fork oil, you need to know the year of the fork. means, you need to know if it's a bladder or non bladder fork.
oil height of the bladder fork is approx. 70mm, non bladder forks run about 100mm oil level.
oil amount is about 530-600cc per leg
SOURCE: best oil for honda innova 125
a 10-30w will be the one and use a synthetic blend. do not use a full synthetic.
SOURCE: i need to know the best oil for honda innova 125
Use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell.
Please top rate this answer. Thanks!
SOURCE: Front fork oil capacity
Hi Lukepentcof.
its 350cc or 11.8 ounces in the Clyma book, but that's for a 1986 onwards model. you can vary the amount you use to suit your style of riding anyways. I doubt it would be that far from the mark.
regards
robotek
SOURCE: Oil level in front forks
Recommended fork fluid: Pro-Honda Suspension Fluid SS-8 Fork fluid capacity/level: 474 ± 2.5 cm3 (16.0 ± 0.08 US oz)/100 mm (3.9 in)
SOURCE: how much 5w oil goes into each fork?
Using 5w oil with stock springs, your oil level should be about 100mm from the top with the fork fully compressed, damper rod pushed all the way down, and the spring out. I hope this helps and good luck. Please vote and leave a message.
4,777 views
Usually answered in minutes!
×