I want to change the oil seals and I can't the oil capacity of the fork.
SOURCE: Need to change fork seals on xr400
http://www.carlsalter.com/motorcycle-manuals.asp
free pdf service manual here
SOURCE: Fork Oil Capacity
Use Yamaha suspension oil #01. Amount is 19 ounces. Oil level from top surface w/o cap nut is 3.15" to 5.51". I am sending you a link to a site where you can download a free shop repair manual. It is actually a bit complicated as you will see in the manual.
http://www.carlsalter.com/motorcycle-manuals.asp
Top rating due on this one! Thanks!
SOURCE: belt on scooter keeps breakin
Most adults have excellent records of never breaking a belt. Here is the reason why many kids break their belts,--- If you hop a curve, you must let go of the throttle. DO NOT have the throttle on wide open (full open) and hop a curve. If you do when the rear wheel comes off the ground, the rear wheel spins faster. When the scooter lands and the rear wheel hits the ground, you stop the tire from spinning, it will snap the belt. If you do hop a curve, let go of the throttle. When you land give it a little throttle. As you pick up speed then give it full throttle.
SOURCE: 97 yamaha thunderace fork oil capacity
270mls per leg, or 280 if you want a little stiffer ride
SOURCE: Fork oil capacity for a 2005 kawasaki vn1600 mean
Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
[email protected]
VN1600 manual...
http://www.scribd.com/doc/9607829/Kawasaki-VN1600-A1A2-Vulcan-03-Service-Manual-ENG-by-MosuenoPW
540 views
Usually answered in minutes!
×