This thing is a design flaw if chain needs a buffer - it's too close to the swing arm - solution: put a piece of rubber in there to get eaten away!!Does the Wheel have to come off?
Check the attached links,Manuals and guides, Good luck with your Bike
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.carlsalter.com/motorcycle-manuals.asp
ATV Motorcycle Repair Manuals Repair Manuals Online
What to do When Your Motorcycle Won Start
SOURCE: Will 190/0x17 tire clear the chain, swing arm, etc. on a GSF 1200
depends on the make of tyre whether u will have clearance or not. U should b aware that 190s r not made to run on 5.5 inch rims and doing so stuffs up the tyres profile and will adversely effect the handling.
SOURCE: Is it possible to use an o-ring chain on a 1997
You can use the o-ring chain but make sure the lube you use on the chain is o-ring compatible.Some will affect the o-rings in the chain.Only way to get the chain on is to remove the rear wheel.Its not a hard job.1st time you do it,have a pen and paper handy and draw every washer,spacer and backet as you are looking at it.That way when it goes back together, you have a redy ref. to look at.Make sure you draw each shape of each piece.Draw the axle out very slowly so if anything drops,you know where it came from.Also,lay out every item in the order that it was assembled on a clean flat surface.Work slowly.Hope this helps
SOURCE: how to install chain buffer on a 95 gsxr 750 ws
pull front sprocket gear , buffer installs behind gear
SOURCE: How is a chain buffer installed?
https://www.bing.com/videos/search?q=How+is+a+chain+buffer+installed&FORM=HDRSC3
Testimonial: "It's a Chain Buffer for a Suzuki Motorcycle not a chainsaw or rifle! Fixya fails yet again."
41 views
Usually answered in minutes!
×