2000 suzuki marauder vz800 Changing rings in head need to know the foot pound pressure on 14mm head bolt and on 10mm head bolt?

SOURCE: Looking for an Owners Manual

Hi, not sure if this will help. Click the link and choose your model. All in PDF format and can be downloaded for free.... http://www.manualz.info/Manuals_pdf/SUZUKI/

Isaac Hern?ndez

• 2 Answers
• Posted on Mar 07, 2009

SOURCE: Adjustable rear shocks

There are 2 holes at the base of the shock absorbers. Turn them clockwise for a softer drive. At factory they are setted at 3. THey go from 1 to 6.

SOURCE: how does the tank come off on a 2001 suzuki vz800 marauder

first take off the seat
when the front seat is removed you will clearly see 2 10 mm bolts holding down the tank...
you must also disconnect the fuel lines at the fuel shut off switch, i plug them with golf tees
perfect fit.

SOURCE: How many quarts of oil does my 2001 VZ800 Suzuki Marauder require

the bike should be straight up and down and the oli level should be in the middle of the glass you bike should take around 4 qts

SOURCE: I need to know the oil capacity of the front

FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
 Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
 99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
 09940-52841: Inner rod holder
NOTE:
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
 Fork oil level: 153 mm (6.02 in)
 09943-74111: Front fork oil level gauge