Good fuel pres , good inj pulse, good spark , computer diag only one code p1000, mass air norm. tps norm .can spray carb cleanere into snorkle car runs fine shut it off back to square bone
Is the fuel pressure at specs? Make sure of that. Also maybe the fuel pump relay is not turning the pump on for starting? Just turning the key to on, not start, should activate the pump for about 2 seconds, putting gas in the fuel rail at correct pressure for good starts. Have you checked the fuel pump circuit?
Www.ask.com/mfg.name/make/model/error/code/p1000/
did you check the rotor cap, check points and condenser if you have 1,
solenoid, check the wiring that plugs into the alternator, check all ground clean of rust, dirt, grease, oil,
if you have carburetor system, this a float issue, not set right
I KNOW YOU SAID YOU HAD GOOD FUEL PRESSURE but what if the pressure is to high???????????????????
contact me for more info if these ideas dont work
this car is dis igntion it has a module
call the local auto part to see if they can help with a testing device.
www.youtube.com/how to test ingnion module
is the start okay, if the starter missing teeth it will just spin. also if you have a fly wheel cover, remove it check for metal shavings, look at the flywheel see if any broken teeth, 1/2 gear broken off.
×
115 views
Usually answered in minutes!
×