Question about Kymco Motorcycles

1 Answer

2005 people 50 2 stroke. Why won't it start?

It has a new coil, cdi , the stator is perfect and the spark plug is new but no spark

Posted by Anonymous on

  • Anonymous Nov 03, 2015

    Thank you, also new battery , could the voltage rectifier be bad ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Kymco Master
  • 9,098 Answers

My scooter has no spark how to fix. gy6 chinese ... - YouTube

? 2:29
https://www.youtube.com/watch?v=UU4S0Ov9q4c
Aug 24, 2012 - Uploaded by Rolling Wrench
Purchase our "NO SPARK KIT" click the link below: ... My scooter has no spark how to fix. gy6 chinese scooter 139qmb qmb13950cc 150cc.

Author Topic: people 50 2 stroke no spark CDI?? - KymcoForum.com

www.kymcoforum.com > Scooters - 50cc > People 50
Aug 5, 2012 - 7 posts - ‎4 authors I have a 2001 people 50 2 stroke that only has 125 original miles. ... I ordered a CDI and coil from monster parts and it still would not start . Author Topic: (Almost) no spark / engine not ...
15 posts
Aug 15, 2011
Kymco People 50 - Not A Morning Scooter ...
15 posts
Sep 28, 2010
Author Topic: 2005 People 50 2T Mods ...
15 posts
Jul 27, 2010
Kymco People 50 - KymcoForum.com
10 posts
Nov 15, 2008
More results from www.kymcoforum.com

Posted on Nov 03, 2015

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Joe Stanton

  • 1153 Answers

SOURCE: My Rm 250 wont spark

The Voltage From The Stator To The CDI Should Be Around 40 Volts(AC) At Cranking Speed. Be Sure Your Meter Is Set For (AC) Not (DC). The CDI Changes The (AC) Input Voltage To (DC) Output Voltage To The Primary Terminal At The Coil. An Electrical Shock Hazard Exist If Stator Voltage Is Checked With Engine Running. Always Perform This Test At Cranking Speed (R.P.M.) For SAFETY. 120 Volts (AC) Can Be Present With Engine Running.

Posted on Apr 24, 2013

czaa

Arnie Burke

  • 5968 Answers

SOURCE: kymco zx 50

the batt must read 12.6v always-no less--the alternator probly not workin rite--new brushes may need--stay away from that mechanic and nevr evr replace parts til solution known-relax

Posted on Feb 25, 2014

Testimonial: "ok tnx on advace,i will check the brushes,the battery is ok,it is from car,"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will cdi box stop stator from firing on a 125cc pit dirt bike


Stator will stop the cdi from firing the spark plug and either cdi or stator if bad will stop a spark from being created. The coil, wiring, kill switch and other things can also stop ignition spark.

Oct 14, 2015 | Pit Motorcycles

1 Answer

Not getting spark at the spark plug on a 04 crf 70


Start with new plug ., then work your way to stator ., so plug., plug wire ,.coil.,, cdi ., stator.,., easy to test all them and chase your faulty part

Dec 05, 2012 | 2004 Honda CRF 100 F

1 Answer

No Spark, No Power coming from CDI to coil


Check the wiring on the connector plugs make sure all the wires are the same color on both sides, red to red blue to blue and so on. I had the same problem After replacing a stator and just plugging it in,after two weeks a new cdi and coil i noticed there were two wires transposed.

Aug 22, 2012 | Pit Bike 125cc 4 Stroke Dirt Bike

1 Answer

Symptoms of bad cdi igniter 1985 yamaha xj700 maxim


Hey Roland,
I have the same problem. How did you fix this problem? Was it the Ignitor or the Rectifier? Please let me know. Thanks.

Aug 02, 2012 | Yamaha Motorcycles

1 Answer

I have a 2010 Oliver City CPI, motor scooter. The engine wont start. The starter seems to work and theres gas in it. Tried the kickstarter and wont start. bad spark plug maybe?


My problem started like this,I found No spark so changed coil,cdi,voltage reg,eventualy found stator at fault,check pick up strip on flywheel and pick up pin on black pick up coil,this is fixed to stator and sends spark signal to cdi,mine were both rusty/dirty,I fitted a new stator,but now have light problems..stator seems to be to strong.

Jul 14, 2011 | 2011 Cpi Oliver City

3 Answers

My Rm 250 wont spark need to know the volts from stator to cdi plug. Got brand new cdi, stator , rotor and pick up coil but it still wont spark.


The Voltage From The Stator To The CDI Should Be Around 40 Volts(AC) At Cranking Speed. Be Sure Your Meter Is Set For (AC) Not (DC). The CDI Changes The (AC) Input Voltage To (DC) Output Voltage To The Primary Terminal At The Coil. An Electrical Shock Hazard Exist If Stator Voltage Is Checked With Engine Running. Always Perform This Test At Cranking Speed (R.P.M.) For SAFETY. 120 Volts (AC) Can Be Present With Engine Running.

May 22, 2011 | 2003 Suzuki RM 250

2 Answers

Hi i have a 1997 yamaha 350 warrior i have no spark to the spark plug what could be


hello, you probably need to have your stator checked out, sometimes the pickup coil in the stator will go out, also you can try ign coil, the one spark plug wire is hooked to,warriors are bad about cdi going out, mine would idle, would not rev up, would bog down, source coil in stator probably needs to be checked also..

Feb 27, 2010 | 1974 Yamaha DT 360

1 Answer

IT WONT FIRE AT THE SPARK PLUGS,ITS A 2004 YZF 600R


Check the CDI , the stator,and coil for power,If you have power at the stator but not the coil,The CDI is bad,If you have power at the coil but not the plug,The coil is bad.

Jul 29, 2009 | 2004 Yamaha YZF 600 R thunder cat

2 Answers

Kawasaki kx80 has no spark


hi mate replace wires/cables and put another spark plug in it could be spark plug fouling and try the cdi in another kx80 also replace hd lead from coil to sparky

May 19, 2009 | kawasaki Full Suspension Mountain Bike Men

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...