SOURCE: trying to replace ignition, trying to remove the old ignition.
This is not hard to do, first remove all the steering column plastic, then you'll see two bolts with no heads on them. Take a chisel and a hammer and loosen the bolts, counterclockwise. Install the same way except the new lock assembly will have reverse hex screws you torque down until the heads break off. good luck.
SOURCE: what is the lock for down at the drivers seat near
It locks the lever that opens the trunk of the car so you wont be able to use that lever to open the trunk from inside the vehicle. The master key should fit in it. You will still be able to open the truck with the key on the outside right at the trunk with the key even if you have the lever locked. It's a security thing. I hope this helps.
Testimonial: "Thank you so much it was a huge help"
210 views
Usually answered in minutes!
×