Key ignition on side near motor cycle; the starter switch is on handle bar. rotate swith then press starter and starter does not turn engine.I can start by jumping off by relay terminals
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How are you trying to open the door , button on key fob ? With this system you can pull up on the drivers handle an it activates
Antennas in the external side door handles (C30/C70 front doors, S40/V50 rear doors)
Antennas in the passenger compartment and cargo compartment
An antenna in the rear bumper
Quick lock motors in the lock units in the side doors
The remote keyless entry (RKE) receiver receives a signal from the key
The switch in the clutch pedal (manual transmissions) or a signal from the brake pedal switch via the central electronic module (CEM) (automatic transmissions)
Key-in switch.
Switch in door handle and lock button on handle .
If a door handle is pulled outward, a switch closes that wakes up the system and activates the antennas in the handles on the side where the handle has been pulled out. If a valid key is within a radius of approx. 1.5 metres from the handle, the relevant door will open and the vehicle will unlock one or several doors. Which doors are unlocked depends on the settings for the system. The vehicle can also be unlocked if the handle is affected on the tailgate.
Hi well it's Looks like a fuse blowing problem!
Check on the fuse box under the seat ,there are a main big fuse and two small fuses! Check it out first .
look at the right side of the handle bars swithes, if you hve a starter there will be a starte button, also check under the carb or around the cylinder for a starter motor
check cut/safety switches . not sure about the circuit on this model but could be the side stand switch or the brake switch (on the handle bar)also check the rear tail light bulb is working when brakes applied. good luck...spaz.......Regards.....tabbycat
×