Question about 2004 Suzuki VS 800 Intruder

1 Answer

04 suzuki intruder 800 starts fine idles fine but no top end power.??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 60,754 Answers

Hi, Michael and the usual suspects are:
1. Inlet system air leak.
2. Enrichener valve not seated or leaking.
3. Damaged or restricted fuel tank vent system.
4. Restricted fuel supply tract.
5. Dirty or damaged air cleaner element.
6. Plugged bowl vent or overflow.
7. Worn or damaged needle or needle jet.
8. Vacuum piston assembly malfunction.
9. Loose or plugged main jets or passages.
10. Improper float level.
11. Accelerator pumps inoperative.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
2004 VL800 Problems Backfiring and Power Loss
Sputtering and loss of power between 90 100 mph
Suzuki VL800 Service Manual
OEM parts for Suzuki
Suzuki VL800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Nov 27, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i find starter solenoid on 04 intruder 800?


Hi, Paul the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Amazon com Starter Solenoid Relay Suzuki VS 800 GL VS800GL Intruder 1993...
Motorcycle Starter Motors Relays for Suzuki Intruder 800 eBay
Suzuki VS700 Service Manual and 800
OEM parts for Suzuki
Suzuki VL800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 15, 2017 | 2004 Suzuki Intruder 800

1 Answer

How do I get my 800 intruder to idle slower have adjusted cables and idle screw still idles too fast


Hi, David and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector
10. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links blue below. Good luck and have a wonderful day.
Help High Idle issues
Intruders Alert
Suzuki VS700 Service Manual
OEM parts for Suzuki
Suzuki VL800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 19, 2017 | Suzuki VS 800 Intruder Motorcycles

1 Answer

My 97 intruder 800 won't run without starting fluid. Can anyone help me figure this out?


Hi, Anthony and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
13. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.sportbikeworld.com/forums/179-atv-dirtbikes/32786-bike-burns-starter-fluid-but-wont-run.html
http://www.fireblades.org/forums/honda-cbr-600/80304-starting-problems-turns-over-but-only-starts-starting-fluid.html
Suzuki VS700 1985 Service Repair Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/uncategorized-suzuki-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 18, 2017 | 1996 Suzuki VS 800 Intruder

1 Answer

Can I start my 99 Suzuki Intruder 1500 without a key


The keys aren't particularly high tech and the locks wear. If you can find a key that fits, it may well turn. Or remove the lock and take it to a Suzuki dealer to get a new key. Or bang a small stubby wide blade screwdriver into the lock and turn it with grips. Buy a new one on ebay.


MANY 97 04 SUZUKI INTRUDER VL1500 1500 MARAUDER 800 IGNITION SWITCH 37110...

Nov 27, 2016 | Suzuki Motorcycles

1 Answer

Cooling fan dont work


If you let the bike sit and idle for about ten minutes and the cooling fan doesn't come on, it usually means your radiator fluid is low. The sensor to turn on the fan sits at the top of the radiator. So if it doesn't come on after the bike gets up to heat (this can take a LONG time in cold weather), you need to flush your radiator. Intruder Alert Suzuki Intruder and Boulevard Owners Club

Apr 06, 2014 | 1998 Suzuki VS 800 Intruder

1 Answer

Have a 2000 Suzuki Intruder 800. Back cylinder


When cleaning a multi carb bike, it is best to take them all off. Clean and reset float levels on both. Then reinstall, set both idle mixture screws about 1 turn out. Then adjust, and you'll probably have to syncronise them also.

Mar 06, 2018 | 2000 Suzuki VS 800 Intruder

1 Answer

Rough idle and backfire at low end RPM


Spark plug or plug wire
After that look to your coil

Mar 30, 2010 | 2000 Suzuki VS 800 Intruder

3 Answers

Starts fine. sounds fine but dies upon putting it in gear


Your kickstand switch is either broken or out of position. The bike kills the engine as a safety feature if it thinks the sidestand is down and the bike is put in gear while the engine is running.

Apr 12, 2009 | 1993 Suzuki VS 800 Intruder

Not finding what you are looking for?
2004 Suzuki VS 800 Intruder Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6085 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...