Follow this link on adjustment. C50 Shock Adjustment
SOURCE: Adjustable rear shocks
There are 2 holes at the base of the shock absorbers. Turn them clockwise for a softer drive. At factory they are setted at 3. THey go from 1 to 6.
SOURCE: Any way to adjust the rear shocks on a 1996 vulcan 1500-a10 ?
dear susan shock adjustment for the rear shock are done with c wrench. you will notice at the top of the shocks there is a ring with 3 adjustment cams. the wrench is placed in the two holes you see on the shock opposite each other this is where the wrench fits you simply turn either direction for softer or harder ride. this adjustment puts more or less tension on the spring. i own a 96 vulcan as well hope this will help you jim
SOURCE: Cannot remove grips on the handlebars of my Suzuki Boulevard C-50
If you have an air compressor and air gun tip simply
insert the tip into the grip and apply air but
you need to remove the vibration dampeners first
SOURCE: 2007 Suzuki C50 Boulevard Oil weight
dear bldrnr the proper oil weight for your bic depends on the climate where you ride 20/50 is recommended for hot climates 10/40 is recommended for average temps. jim
SOURCE: 2005 Boulevard C50: can you put synthetic oil in a suzuki boulevard c5...
As long as the oil does not have the "energy saving" designation in the rating emblem, synthetic work just fine in the Boulevard.
1,446 views
Usually answered in minutes!
×