Putting new clutch plates in a vs 1400 intruder what is the torque specs for the spring bolts in the clutch
SOURCE: I need the bolt torque specs
go to the local auto parts store and purchase a Chiltons Repair Manual on your car, it has all the torque specs listed for this. Or you could try the library and see if there is one there for your car and just look it up for free..... just write it all down.
SOURCE: 87 samurai bolt torque specs for engine
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
SOURCE: what is the torque for the bolts that hold the
I've never really torqued these bolts and I've replaced plenty of the diaphragm springs. Usually I put stronger springs in the clutch since I'm building up the horsepower of the engines. I put a drop of Loctite 242 (med, strength blue) and tighten the bolts to about 25-30 foot pounds. Check the standard torque for a grade five bolt of the size that are in the clutch.
910 views
Usually answered in minutes!
×