Question about Motorcycles

2 Answers

How to patch a tear in my motorcycle seat @ - Motorcycles

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 122 Answers

Hi - the short answer it will never looks my good repaired.
You can buy a brand new seat cobmver off ebay for about $45.
Buy one and do it properly first time

Posted on Nov 03, 2019

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Motorcycles Master
  • 59,789 Answers

Hi, Steven for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Repair Small Tear in Motorcycle Seat
How to Repair Motorcycle Seat
How to Repair Torn Motorcycle Seat Cover
vinyl seat repair
motorcycle vinyl seat repair

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Dec 29, 2017

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 15 Answers

SOURCE: tear on bottom of seat of jeep jogging stroller

First I would use some fabric glue (you can get it in the craft or fabric stores) then I would put a patch on it to cover the damaged part and make the fabric stronger. Some of the iron on patches are not very strong and they start to come off. Maybe just glue on a patch with the fabric glue.
Good luck!

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

What is an easy way to repair small tear in leather car seat


some auto stores carry but most craft stores carry a leather repair kit comes with multi colored little containers and different grain patches that u iron if you have a grain designed seat cost under 15 bucks and if you have a weird color u can mix colors to match

Aug 02, 2015 | Seat Cars & Trucks

Tip

Save even more money! I did this repair for under $20. Instead of replacing the...


This advice is for the Kenmore Elite and Whirlpool Duet FRONT LOADER style washing machines. A lot of concerns have been raised about door bellows molding, mildewing, and/or ripping and needing replaced. A replacement bellow isn’t cheap (prices vary, but are around $75-80), so hopefully these helpful steps will eliminate the need to call a repair service and pay the additional labor charges. This is a repair of MODERATE difficulty. Just follow these steps:

1. Unplug the washer.
2. Remove the washer top panel by removing the three torx-type screws (or 7mm) where it attaches in the rear of the washer. The panel should slide back, and then lift off.
3. Remove the operator console by removing the dispenser and the scew(s) behind it. Take a putty knife and insert it under the console seam right above the door. If you push in slightly while pulling outwards the panel pops off. Use care not to pull or damage any of the wiring. You can leave the wires attached and simply lay the console across the top of the washer out of the way.
4. Locate the wire hoop retainer around the rubber door boot. It is located behind the rubber seam where it attaches to the door frame. Follow this hoop around to the bottom of the door opening and locate the wire tension spring. Gently pry this spring apart and pull the wire hoop from the groove. Pull the rubber boot from the frame and push it inside towards the wash tub. You will also have to remove the door boot from the fill tube on the left hand side of the door opening. There is a small wire clamp holding it in place.
5. Remove the three screws that hold the door latch assembly in place. This is on the right hand side of the door opening. You can leave the latch in place as long as you remove the screws and push it inside slightly to remove it from the front casing of the washer.
6. Remove the door by removing the screws holding the hinges in place. Use care to support the door hinges when loosening. They can bend. Set the door aside in a location where it will not get stepped on or broken.
7. Remove the lower kick panel under the door. There are 3 screws under the bottom edge holding it in place. Sometimes the panel can stick. A slight tap on either side will knock it free.
8. Remove the front washer casing by removing the four remaining screws that are holding it in place. There should be two at the top and two at the bottom. Set the front casing aside.
9. Remove the old door boot by locating the large clamp that attaches it to the wash tub. Loosen the 7mm nut and the boot will detach from the tub. Also remove the boot from the fill tube coming from the dispenser.
10. Install new door boot on the wash tub and install clamp. There should be instructions that come with the door boot with guide marks to ensure you align it correctly. Once you have the boot in place, tighten the clamp enough to where it is snug. DO NOT over-tighten or you may damage the tub and or clamp. In most cases the clamp will break.
11. Once you have the boot in place, re-install everything in the reverse order of how I explained to disassemble. Make sure you connect the door latch assembly BEFORE you re-install the outer portion of the door boot. Also, make sure you install the boot completely over the fill tube. There should be a ridge on the tube where to stop. Sometimes the tube is not inserted all way into the boot and water will leak behind it. The clamp is always difficult to get back in place. If you cannot get the clamp to go back over the tube, you can live without it. Some newer models do not have them installed. Just make sure it is a snug fit where the rubber boot fits ALL the way back to the plastic ridge on the tube.
12. When you get the point where you are ready to install the door boot back over the frame of the door opening ensure you fit it snugly all the way around the door. Beginning at the top of the door, start inserting the wire hoop back into the groove. Make sure to wire spring points towards the bottom. As you work your way around the door to the 4 and 8 o'clock positions, you will need to maintain some constant downward pressure while pulling the spring apart in order to snap it back into place. It would be advisable to use a second set of hands to hold the wire hoop in place while doing this as it has the tendency to want to come out of the groove.
13. Once the door boot is back in place, re-install the operator console and washer top.
14. At the operator console, select DRAIN SPIN, NO SPIN and press any button under OPTIONS 4 times (has to be the same button, though). This will place the washer in diagnostics mode. You should hear the door latch lock and "C00" will be displayed on the console. The washer will run through a series of tests filling the tub, tumbling, draining, and then a final spin. If you do not wish to wait for the test to complete you can press CANCEL at any time. The test checks out everything and takes about 15 minutes. Look for any leaks.

I hope you find these instructions helpful and good luck to you.

on May 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

I have a 2012yahama zuma and i locked the ignition keys under the seat. How can I open the seat without a key? THX


I'm not sure (don't own a Zuma) but maybe if you remove the front panel, in front of the seat you may have access to the bolts that hold on the hinge to the seat. If you can unbolt the hinge then just flex the seat up and work your hand under there.
(worst case scenario), take off the front panel, drill a hole in the underseat bucket, and get key, patch hole, get new key cut

At least if you need to tear into it, do it where nobody can see it.Once you patch the hole, put a ZF sticker over the patch

Jul 15, 2015 | Motorcycles

1 Answer

I have a 2008 New Beetle VW the convertible top is starting to wear how can I catch the tears inexpensively


a patch kit might work on it im not too sure how it will work ive patched seats from tears and cigarette burns so that might work and you can pick one up at walmart.

Jul 24, 2012 | Volkswagen Beetle Cars & Trucks

1 Answer

REPAIR CONE TEAR IN 18"


If the tear is large, or the speaker cone is brittle because of age, you might be best off having the speaker completely reconed. There are companies that offer the service, or you can buy replacement cones and do it yourself.

For small tears (an inch or so long), you can glue a patch in place. I have used a piece of a paper coffee filter as a patch, and plain white Elmer's glue slightly thinned with water. Put the patch over the tear and use a small brush to spread a thin layer of glue over it. Give it a day to thoroughly dry and you should be set.

I have found this repair to be more effective on smaller speakers than on large woofers, though. The woofer cones are more mechanically active. But I patched a couple of 15-inch cones that had been punctured for a friend, and they are still playing after a year. So it can't hurt to try.

Jan 30, 2011 | Audio Players & Recorders

1 Answer

Tear on bottom of seat of jeep jogging stroller , wondering if I can iron on a patch??


First I would use some fabric glue (you can get it in the craft or fabric stores) then I would put a patch on it to cover the damaged part and make the fabric stronger. Some of the iron on patches are not very strong and they start to come off. Maybe just glue on a patch with the fabric glue.
Good luck!

Sep 26, 2009 | Jeep Liberty Limited Urban Terrain Jogger...

1 Answer

Tears in a trampoline net


You can use a patch, but most trampolines fabric is made to stretch, and a patch interferes with that often transferring the stress to another location causing additional wear on the fabric. Best thing to do is to simply replace the entire mat. The weather is pretty ******* them.

Nov 26, 2017 | Trampolines BQC1620

3 Answers

Small rip in treadmill belt


No really. You need to replace the entire walking belt. Not to hard of a job and most replacement belts come with some instructions. We use www.treadmillpartszone.com for parts.

Apr 10, 2009 | NordicTrack E4000 Treadmill

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...