Question about Kymco Motorcycles
Sf20af kymco scoter is getting hot after drive Cople of mile
Posted by Anonymous on
The sump plug will be on the bottom of the engine but theseold Honda copy (GY) engines don't use an oil filter they have a wire mesh gauze screen that sits on top of the sump plug bolt so make sure this comes out with the sump plug and is free from any dirt/debris. so drain oil clean the gauze screen then refit and refill your oil. check your oil level if its low or black and burnt this could be your over heating problem but I would also check to make sure the auto choke isn't sticking on. Best of luck hope this is of some help
Posted on Feb 08, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
At 300 miles the only thing you might want to do is check the gearbox oil level and then lube and adjust the chain. Check with the dealer on the filter type. As to what type of oil, use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If in a hot area like Texas or New Mexico go with 20w50.
Please rate my answer. Thanks!
Posted on Oct 27, 2009
could be a few things-(if oil pressure is showing low usually under 20 lbs recheck oil level) bad sensor,oil pump,low oil level ,sludge have truck scanned for trouble code some stores such as auto zone / advanced auto scan for free
Posted on Nov 04, 2009
SOURCE: How may more miles can
No problem, you will be fine to drive it until you can get to the shop as long as the engine seems to be running OK and it is not overheating or the "oil" light is not on. Something as simple as a loose gas cap can turn on the maintenance light, chances are though, on this car it was common for a failing VVT-i cam sprocket to get stuck and cause misfire codes. The fix involves replacing the cam sprocket, something Toyota used to cover under warranty, but not likely anymore.
Posted on Jan 01, 2011
Testimonial: "Thanks so much. I'll ask mechanic to check the sprocket. anne"
Welcome to fixya Hello I have a solution for this Press Ok, Accept or replay so we may get started Your pre-solution is coming up shortly PLEASE
REPLY OR LEAVE COMMENT TO CONFIRM YOU RECEIVED THIS EMAIL My name is Bruce
Welcome to fixya
I have a solution for this
Press Ok, Accept or replay so we may get started
Your pre-solution is coming up shortly
REPLY OR LEAVE COMMENT TO CONFIRM YOU RECEIVED THIS EMAIL
My name is Bruce
Posted on Jan 17, 2011
Tips for a great answer:
Jul 31, 2018 | 2004 Kymco Cobra Cross
Jul 08, 2018 | Motorcycles
Aug 04, 2016 | Kymco Motorcycles
Oct 10, 2014 | 2011 Kymco Yager GT 200i
Aug 03, 2014 | 2014 Kymco Movie 150
Jun 25, 2014 | 2005 Mercury Mountaineer
Oct 27, 2009 | Kymco People S 200 Motorcycles
Sep 29, 2009 | 1994 Ford Thunderbird
Jun 22, 2009 | Chevrolet Impala Cars & Trucks
40 people viewed this question
Usually answered in minutes!