Question about 2016 Triumph Bonneville T120 Base
2016 Triumph T120 motorcycle. Location of rad pressure/fill cap. Is it under fuel tank? Need to refill after removing rad to fit accessories. Thanks Need to refill after removing rad to fit accessories. Thanks @
Hi, Ron for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Triumph, despair not, for a mere $30 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2016 Triumph T120 Bonneville radiator cap location Google Search
Triumph Bonneville T120 2016 2017 Repair Manuals
2016 Triumph Bonneville T120 Parts OEM Diagram
Triumph Motorcycles free owners manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 27, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is only one tank to fill on your bike, your getting confused by the reserve. The reserve is just on the fuel tap itself. It has three positions, on , off and reserve. In the on position your fuel tap will be able to drink about 90% of your fuel tank and then it wont be able to drain anymore, then you must turn your fuel tap to the reserve position and it will be able to drink rest of your tank approx 10% that is left. So next time you fill up at a petrol station make sure your fuel tap is set to on, then when your bike starts to splutter out of fuel you can turn your fuel tap to reserve and get yourself to the petrol station to fill up, making sure you then turn your tap to on again. If you keep running out on the reserve it can cause debris in your tank to clog your carb up.
hope this helps
Posted on Aug 01, 2009
it should work yes and just trace the lines from the compressor to the valve on the line it usually is near the radiator and the line will be silver aluminum
Posted on Aug 21, 2009
Testimonial: "Thank you very much."
Several things could be at play: Type or weight of oil, confirm this first. Not to question the rebuild but if not done properly (improper bearing clearances, too large) the oil pressure can be low and perhaps a worn pump too. While I am unfamiliar with the engine and oil pump loaction I'd check it if your able too. You'll probably need a good set of feeler gauges to check this if these clearances are outside of the pumps limits the pump will be less able to create pressure; this is of course more evident when the oil heats up.
Another cheap fix is to use a heavier weight oil.
Hope this might help,
Posted on Aug 21, 2009
Tips for a great answer:
Apr 13, 2018 | Triumph Motorcycles
Apr 03, 2018 | 2016 Triumph America Base
Dec 12, 2016 | 2016 Triumph Bonneville T120 Base
Jun 28, 2014 | Triumph Bonneville Motorcycles
Aug 24, 2017 | Triumph Motorcycles
Mar 01, 2011 | Triumph Bonneville Motorcycles
Feb 12, 2011 | 2004 Triumph Daytona 600
Aug 07, 2010 | 2004 Honda VT 1100 C2 Shadow Sabre
Jul 05, 2010 | 2003 Jeep Grand Cherokee
214 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: