I have a 2015 Harley Heritage 103 displacement. I took a ride one day pulled up to an inspection station to see if he inspected bikes. I shut my Harley down, ask my question, ended up he didn't inspect bikes so I turn my ignition switch back on hit my run button and hipster starter button and nothing I have full power at my ignition my lights are on and so forth but not the starter switch wouldn't even turn over, any ideas please thanks in advance @
SOURCE: Night Service Button
Sounds to me like "inspect" might be the button programmed on the phone. IF the button is labeled "night" then you can reprogram the button.
press "SPKR # 0 0"
Press the button labeled "Night"
Press "* 3 9"
Then press the "home" or "exit" button.
See if that works...
SOURCE: push starter button and no start
Hello,
Evansville! Nice part of the World.
Bud's Harley Shop still there?
O.k. daft thing is the off run switch on the handlebars turned to off?
Failing this will the bike start and run off bumping (Push start).
If it does take a look at the battery (Maybe Dead cell/s) or Starter solenoid wire/fuse.
Solenoid is located near the battery it is the cylindrical item with the main pos+ wire from battery going to it.
Good Luck! could do with a new Bud's Harley 'T' shirt as mines worn out.
Paul 'W'
Onyer~EDson(:0 {#><U.K.
Oh! please remember to politely rate my effort!
SOURCE: torque specs for derby , inspection cover, &
what is the torque specs for a derby cover on my 2009 Soft tail?
SOURCE: my 1999 Ford F150 wont pass inspection because the
You would have to get it on a diagnostic machine to have it turned off, cost about $25 to be honest you could just take the bulb out until after the inspection, thing is mostly they come on for no valid reason, its just another way the car makers squeze money out of us.
hope that helps
Regards
Dan
SOURCE: I have a 2002 Audi
Replace oxygen sensors and have OBII scan at any good parts store and they can reset light door you. They do the scan free
192 views
Usually answered in minutes!
×