How do I adjust the headlights. I just bought this bike and it seems the headlights don't shine far enough in front of the bike.
Generally on headlights, there is going to be 2 adjusting screws. You can tell them because they don't match the other screws holding the headlight in place. If you need to take off the outer ring to gain access to them. Stand the bike back around 30 feet and draw a horizontal line in tape ( usually against a garage door ) approx, 36" from the ground. Line up the headlight with that line and you should be good to go. 1 screw is generally a horizontal adjustment and the other is a vertical adjusting screw.
I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb
Testimonial: "Thanks. I had to take whole assembly off and found one of the screws had disengaged from the nut. Once corrected I can now see really well at night."
1,131 views
Usually answered in minutes!
×