Bought the bike no cancelling unit

You are using the wrong forum to do this. Go into your account settings. Search payment methods. Then select cancel. This is a forum for fixing things, not your account.

Disable auto-renew on your Prime account. Update: It seems like Amazon might have temporarily removed the option to cancel your membership online. If you're having trouble, you can still follow the rest of the steps and cancel your auto-renewal at a later date, either when the option is restored or through customer service.

Purchase a gift subscription here for $79

Set it to deliver to your own email address on the day that your current year of Prime lapses.

It can be very difficult to bypass alarm systems. They can be wired to several areas of the engine to prevent it being stolen. A Good Auto electrician might be able to help bypass the alarm. Your best, and easiest, option is to take All the Bike details to a Dealer and get a replacement fob. Both of these will cost you money, you just need to work out which option is the best and/or cheapest option.

Sounds like a broken wire in the bike frame,due to cornering hard , causing a shorted wire,,chck for blown fuses

2004 And 2005 There is no bypass pulley manufactured, even though all of them come with AC. but I am learning although mechanics dont want to admit it, if you remove the ac pump a shorter belt WILL work, in fact it will work (very temperorerly because there is a slight rub) without the removeal of ac pump. but a 15 milmeter wrench will get it home to remove the AC pump about 4 hours labor. Orielly's master pro K060815, Auto Zone 822K6, or preptstone 825K6 will work.
GOOD LUCK FRIENDS

well what you need to do is take volt meter and start the bike see if you are getting 13,5 volts at battery or more if not hold throttle at 1500 rpm and see what you have if you do not have this volts coming to battery it could voltage regulator or stator is bad but check all grounds to bike and wiring hope this helps

i have a 78 gs1000 it is the same as your bike and if i'm not misstaken 78,79 are the same i have some 78 ,79 and 80 wiring on mine and it works just fine

its a 1000cc i think, and if its been hot wired it will be most likely in the key part of the wiring, Most bikes if you unplug the key wires it will start but have no lights, if you can get me the make and model i can find you a wire diagram and tell you how to hotwire it.

send a buzz on msn ( [email protected] )
thanks.

new ignition and wires cheap on mrcycles.com . microfish too!