Motorcycles Logo

Related Topics:

Bill Murry Posted on Jul 21, 2019
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 1985 tour glide. The connector coming out of the motor broke and wire is just barely sticking out. Any suggestions for a quick fix?

1 Answer

Arnie Burke

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Motorcycles Master 7,339 Answers
  • Posted on Jul 21, 2019
Arnie Burke
Motorcycles Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 23, 2009
Answers
7339
Questions
0
Helped
1823230
Points
21459

Electrical tape..also inspect complete harness..bikes an antique

5 Related Answers

Robert Johnson

  • 395 Answers
  • Posted on Jan 16, 2008

SOURCE: rf connector broke off

your in luck the set can be repaired. a replacement F connector is available pt # 215543 from any RCA parts disributor. Have a tech help you with the replacement it can be tricky. in the mean time if you have a VCR use that with the compsite video hookup to the tv and let the VCR be your tuner.

Ad

Anonymous

  • 8 Answers
  • Posted on Apr 24, 2009

SOURCE: guitar hero world tour drums- connector on cymbal

i would go back to the shop u got it from and say that wen u opened it had broken and it doesnt connect they should give u back most of the money or if u r lucky they will give u a brand new one for free or for less? tell me how u go on i am interested

Anonymous

  • 314 Answers
  • Posted on Mar 13, 2010

SOURCE: how to wire in a king tour pack on a street glide

If you are not sure what wires go where ,don't risk a meltdown seek advice from someone who fits or has knowledge of fitting tour packs .

ironcrossaud

Iron Cross Audio

  • 281 Answers
  • Posted on Oct 14, 2010

SOURCE: I have a 2003 harley

Front speaker output comes from the amp, which you removed with the tour pack. You will need to wire the speakers directly to the radio speaker out wires to function without the amp

Anonymous

  • 2178 Answers
  • Posted on Nov 04, 2010

SOURCE: I broke the connector from

Try to backup the data you already have in it to a computer. Carefully insert the four wires and the remainder of what's left into a computer's USB port - be careful not to short any of the contacts together or to the chassis of the computer. Make sure the contacts are connected to their corresponding contacts in the USB jack of the input.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1985 Ford Ranger tail Light and dashboard light fuses keep blowing. Now the new fuse is lit up with a red light. How do I fix it and what does it mean when the fuse lights up with a red light. HELP

Somewhere in the wiring you have a bare wire that is touching to ground, which on an old truck is kinda common, there is nmot quick fix or one thing that is causing this, you need to check the whole wiring harness from the switch to the taillights. Here is alink to a poss source of wiring diagras for the truck. http://bbbind.com/free_tsb.html
0helpful
1answer

I wireing my tour Pak (Trunk) Has lights

If you bought the lighting kit from HD you should have instructions coming with the kit. If not or you lost them a Harley dealer either service advisor or parts person can print them off for you. If you have the tour pak and it is already wired then all you will need to do is route the wiring harness and connector out from the front of the tour pak to the area under the seat and connect it to the existing rear lighting connector. If it is not fully wired you may have to purchase necessary harness extension(s) and connector pieces from a Harley Dealer. Of course you could splice into the existing harness and solder the wires together but if the tour pak is quick removable this would make it difficult to remove it as it also would if it is not a quick removable installation type and for some reason you had to remove it from the bike at any time, so in any case you will likely be better off to use the correct harness extension and connectors etc.
4helpful
1answer

How do i remove the gas tank on a 2011 harley FLHTK Electra Glide

Release the fuel quick disconnect on the left side under the tank. Unplug the wires for the fuel sending unit. Remove both bolts on each side at the front of the tank. Remove the seat and remove the bolt at the rear of the tank. Lift the tank off.
0helpful
1answer

I have a 2003 harley road glide with stereo. I have the rear speakers on the detachable tour pack. Also on the tour pack is a 10 or 12 pin connector to what appears to be an amp? All of the wiring is...

Front speaker output comes from the amp, which you removed with the tour pack. You will need to wire the speakers directly to the radio speaker out wires to function without the amp
0helpful
1answer

My jog wheel sticks / doesn't glide like it should...

I had the exact same problem. I was working a party when some drunk ******* spilled some beer in my coffin case, thus getting into the jog wheel and cue button. I continued to work with it for a few months but got pretty fed up and brought it to a pio dealer. They fixed it up quick and cheap, now it glides like my other mk3s. I'd say bring it in a get a quick quote.
0helpful
2answers

My guitar hero world tour drum kit is broken

If you know how to solder, you can resolder the wire back onto the connector. I just did that tonight actually. the orange cymbal has a white wire and a black/bare copper wire. You can cut open the male connector [I use an exact-o knife along the underside mold line] (one side only) so you can just slide the wires/connector back into it. The white would solder onto the base of the male connector. The bare copper thats wrapped around the white one is the black/bare copper wire mentioned above. This one is soldered to the tip [the solder point inside that small black plastic piece] of the connector. Once you have it soldered, just slip the male connector rubber piece back into place and use some super glue to glue back together.I wrap it in electrical tape just so its definitely secured. If wire length is an issue, simply solder some wire extensions before soldering to the male connector/plug.
0helpful
1answer

I need to remove the antenna so i can remove my bags

If you're talking about the FM antenna in the tour-pak, look inside and you will see a small screw on connector for the coax cable.  unscrew the coax and then pull it free from the wire guides on the floor of the tour-pak.  At the front left corner will be a large round rubber grommet.  Pull the grommet out and feed the wire out of the tour-pak.  The wire can be stowed behind the left side cover panel, where the fuses are.
Not finding what you are looking for?

52 views

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66947 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...