Question about Motorcycles
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Could be. Edelbrock carbs (if its the one Im thinking of) are based off of the old Carter AFB carbs. The carb may have a set of jets and metering rods that dont match up with your motor. You should be able to buy a Strip kit for the carb consisting of numorous combinations of metering rods and jets. If your carefull you do not have to pull the carb to change jets and the metering rods are really easy to change. They are vacuum actuated and are located under a flat plate on either side of the carb by the flat surface where the air cleaner seats on the carb. You may also have a simple choke problem. What size is your motor. Did you purchase the carb to go with that motor or is this one you got second hand? If you got the carb second hand it could be the jetting or metering rods. If the starting problem is really the carb get a kit and start playing. You should be able to use the spark plugs as a factor of running rich or lean. Pull a plug and see if its black, white, light grey, or brown. If you have one of the generic shop manuals like Haynes, they have a spark plug condition chart in most of them.
Thats the best I can do in print without going into serious detail.
Hope this helps...
Posted on Oct 19, 2009
Tips for a great answer:
Jan 15, 2017 | Honda Motorcycles
on Jul 29, 2010 | Motorcycles
Jan 05, 2016 | Big Motorcycles
Dec 17, 2014 | Cars & Trucks
Mar 24, 2017 | 2007 Peugeot Speedfight Motorsport 50
Jun 03, 2012 | 2008 Yamaha TTR50E
Jun 04, 2011 | 2005 Yamaha TTR 90 E
Sep 19, 2009 | 1997 kawasaki ZXR 250
Jul 16, 2009 | 2006 Bajaj CT 100
May 22, 2009 | 1986 Chevrolet C2500
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: