Can i bypass ignition on epioneer P202 electric scooter?

please contact your dealer.

You can always disconnect the wires at the brake, tape them up separately, then together so they don't short anything, if that's what you want.

DON"T bypass the breaker, This COULD LEAD TO A CATASTROPHIC MELTDOWN or EVEN, FIRE".

If you want a replacement circuit breaker they are available online for under $10.00.
Just type "Razor E100 Circuit Breaker replacement" in Browser Search.

The Item you want to replace is a 7 Amp DC Circuit Breaker.
the cost is around $5.99.

Do not under any circumstances operate the scooter without circuit protection!

if you cut or connect the correct wires you can bypass post ignition switches

Just put a wired link across the key switch or replace the key switch with a toggle switch.

No, the controller checks the resistance of the combination of the speed and throttle pots on startup.

hi, to bypass the key switch by removing the tiller cover, that is the cover in with the key lock is attached to.

Then all you need to do is short the pins and watch the scooter light up. how ever if there are more than two pins, take the black wire on and short that either to one of the others, do this with care not to touch any other wires within the control panel.

Regards


Please give me feedback..

an electric scooter company can fit a new barrel for around $ 40

need to replace fuel injectors