Re: How much oil is needed to do an oil and filter change...
Fill the filter with oil (but do not overfill it) and in stall it. The capacity of the crankcase is stamped on the oil filler hole in CC. there are 946cc in one US quart.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you go to Bikebandit.com. you can look at parts microfiche break downs of your motorcycle. If you want to look up your own OEM part numbers you can look at the part microfiche at Babbittsonline.com.
Look at the front of the motor behind the front wheel. You should find it there. When you install a new one, put oil in it first and let it soak into the filter, then install. Replace the drain plug crush washer too. Every time you change the oil. Chaz Moto DC
Use 10w40 motor oil in the gear box. Don't use any synthetic lubricants, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If in a hot area like Texas or New Mexico go with 20w50. I don't have a service manual on your particular bike so just check oil quantity with the dealer when you go to buy the new oil filter. Don't forget to lube the cables and chain when doing the oil change.
×