Question about 2009 Suzuki Hayabusa 1340

1 Answer

2009 Suzuki Hayabusa 1340 internal engine specs

1350 Hayabusa I need to know internal engine spec,s eg: valve sizes, bore & stroke. con rod lengths. @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 59,701 Answers

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki GSX R1300 Hayabusa 2008 2013 Workshop Service Repair Download... $15
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals
Suzuki GSX 1300R Hayabusa
Suzuki Hayabusa

Posted on Oct 13, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 75 Answers

SOURCE: hayabusa rear spring spec

overall length 2,140mm(83.4 inches),

Posted on Dec 10, 2008

gregcarolann

Greg Robbins

  • 32 Answers

SOURCE: I need many specs for

If your going to do do that much work , I would invest in a Chilton's or Haynes manual

Posted on Jan 20, 2009

Anonymous

  • 11 Answers

SOURCE: Can I get the detailed engine specifications of a

http://www.motosindia.com/hero-honda-dawn.html#splendor This is a link to the engine specs of the hero honda splendor, hope this is of help, if you need any other info it should be in the bikes manual

Posted on Apr 21, 2009

tombones

  • 3567 Answers

SOURCE: Fitting cam chain after replacing piston/rings.

Here's the deal > the chain position on the crankshaft cog makes no difference. No timing is done on that end. The timing is done when mounting the chain on the OHC. Run the piston up to TDC. Put the cam in a position where the cam lobes are pointing downward. Look at the cam gear. There should be two marks on one side of the gear. You should be able to see the marks from the left side of the engine. The cam is in time when the marks are parallel with the top gasket surface of the head and the gear is bolted to the cam. Now you have TDC compression stroke (good). If the cam lobes were pointing upward you would have TDC exhaust stroke (bad). Just to help you a bit in the future, I have a web site below where you can see a parts fitch for your specific bike.

You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock.
www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Post a comment if you need to get back to me.
Please top rate this solution. Thanks!

Posted on Jun 06, 2009

choprboz5

  • 197 Answers

SOURCE: Engine specifications

Mandis,

The 1997 XLR125R engine specs are:

Bore: 56.5 mm
Stroke: 49.5 mm
Displacement: 124.1 cm
Compression ratio: 9.2:1
Carb: 22 mm PD-type x1
Starter: Electic
Transmission: 5 speed
Ignition: CDI with electronic advance
Horsepower: 11 bhp

I hope this helps!


Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is mitsubishi 4m51 engine block similar with 4d32 or 4d33? Can the crank shaft for 4m51 fit in the 4d,32 engine? Or can the cylinder heads swapped


spec for 4m51 ==5.2 l direct injection diesel
spec for 4d32 ==3.5 l direct injection diesel
bore /stroke 104 x 105
specs for 4d33=4.2l
bore stroke =108 x115
you problem is the length of the stroke which is governed by the throw of the crank pin ( distance from the center of the main journal to the center of the con rod pin)
As there are significant differences in torque ratings between the engines it is possible that the bearing sizes will differ and the blocks will be different
That being the case , it is doubtful if the heads are interchangable
Engine reconditioning companies will possibly have all of the specs for bearings , pistons and heads and you may be able to get a ready comparison or go to en.m.wikipedia.org to get a better idea of the differences

Jun 14, 2018 | Mitsubishi Cars & Trucks

1 Answer

What are the torque settings for the head on a 1e engine


toyota e engine guide - Toyotagtturbo.com

www.toyotagtturbo.com > ... > Modification/ Technical Questions
Sep 15, 2009 - 7 posts - ‎7 authors The 1E is a 1.0L (999 cc) carbureted 12 valve SOHC engine. ... Specs: 74 mm Bore 77.4 mm Stroke 9.6:1 Compression Ratio ... Engine Code Head Design Valves/Cylinder Date CC Peak HP Peak Torque Bore Stroke CR 1E ...

[PDF]Full page fax print - AMC Eagles Den

www.amceaglesden.com/images/Downloads/ENGINE%20MANUAL.pdf
All information and specifications in this manual are based on the latest data available at the time of .... 1E ENGINES Cylinder Head Bolt Torque Specifications ...

Oct 07, 2015 | Cars & Trucks

1 Answer

How many quarts does a 2003 Suzuki Marauder 800 use


  1. Suzuki VZ800 Marauder - Motorcycle Specs

    www.motorcyclespecs.co.za/model/suzu/suzuki_vz800_97.htm Suzuki VZ 800 Marauder. Year. 1997. Engine. Four stroke, 45°V-Twin, SOHC, 4 valves per cylinder. Capacity. 805 cc / 49.1 cu in. Bore x Stroke, 83 x 74.4 mm.

Jun 19, 2015 | 2003 Suzuki VZ 800 Marauder

1 Answer

How to adjust carberator floats


  1. Suzuki GSX750F Katana - Motorcycle Specs

    www.motorcyclespecs.co.za/model/suzu/suzuki_gsx750f_05.htm Suzuki GSX 750F Katana. Year. 2004-05. Engine. Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. Capacity. 748 cc / 45.6 cu.in. Bore x Stroke ...

Apr 28, 2015 | 1996 Suzuki GSX 750 F (Katana)

1 Answer

How many cylinders in the vs800 intruder 1995 i dont want to mess up the bill of sale


1995 Suzuki VS 800 Intruder MANUFACTURER SPECIFICATIONS

Manufacturer - Make - Model - Year: Suzuki VS 800 Intruder 1995
Motorcycle Style: Cruiser
ENGINE SPECS

Engine Type: 805 cc, 4 Stroke - Liquid Cooled - V Twin
Engine Bore and Stroke: 83 mm x 74.4 mm
Valves 4 valves/cylinder
Claimed Horsepower: 55 hp (41 kW) @ 7000 rpm
Maximum Torque: 64 Nm (47.2 ft. lbs) @ 5000 rpm
Transmission type: 5 speed
Final Drive: Shaft

Jul 06, 2014 | Suzuki VS 800 Intruder Motorcycles

1 Answer

Engine block numbers


SR = engine code
20 = 2.0 liters
Nissan motor made by "bullet", very high performance race engine, some producing over 1500 hp!!!!! Worth about $8500 (thats dollars) here is a sr block:f317699f-3f13-4aff-bfc7-d3d453d10c26.jpg
The Nissan SR engine is a 1.6 L, 1.8 L, or 2.0 L, straight-44-stroke internal combustion gasoline engine manufactured by Nissan Motors. It features an aluminum head and aluminum block with steel sleeves in selected models and features a DOHC 4-valve design, with variable valve timing on select models. The engine was used in many small to medium Nissan vehicles, including high-performance turbocharged variants. It was designed by Nissan as a replacement for the earlier CA series of engines.

The Nissan SR20DE engine was used in over 15 Nissan models. It first appeared in October 1989, and over time it was gradually phased out with the introduction of the QR (low-emissions) engine family. The SR20DE carried nominal power ratings between 130 to 169 Horsepower (96 to 126 kW) from the factory.
The breakdown of the engine code is as follows:
  • SR - Engine Code
  • 20 - 2.0 Litres
  • D - Dual Overhead Cam
  • E - Multi-port Fuel Injection

This engine has the following specifications (SAE, 1991)
The Specs Type: Water cooled, 4 cycle in-line 4 cylinder Combustion Chamber: Cross flow, pentroof type Valve mechanism: DOHC, 4 valves per cylinder, chain drive Displacement: 1998cc Bore x Stroke: 86.0 x 86.0mm Bore Pitch: 97.0mm Block Height: 211.3mm Compression ratio: Crankshaft journal diameter: 55.0mm Crankpin diameter: 48.0mm Con rod length: 136.3mm Valve diameters: Intake: 34.0mm, Exhaust: 30.0mm Dimensions: 685 x 610 x 615mm Maximum power: 140 hp-169 hp at 6400 rpm (SAE net) Maximum torque: 132 lb·ft at 4800 rpm (SAE net) It was used in the following vehicles:
Model
180SX 200SX SE-R Almera Avenir Bluebird Liberty Infiniti G20 NX2000 Prairie Joy Presea Primera Pulsar R'nessa Rasheen Sentra Serena Silvia Wingroad

Dec 04, 2013 | Nissan Cars & Trucks

1 Answer

What is the clearance for rod bearings on the crank of a 98 ford f 150 4.6


General Specifications Item Specification
Displacement L (CID) 4.6 (281)
Number of Cylinders 8
Bore and Stroke mm 90.2 x 90.0
Firing Order 1-3-7-2-6-5-4-8
Oil Pressure (HOT @ 1500 rpm) kPa 138-310
Drive Belt Tension a
Cylinder Head and Valve Train
Combustion Chamber Volume cm 52?±.5
Valve Seats Width?€"Intake mm 1.9-2.1
Valve Seats Width?€"Exhaust mm 1.9-2.1
Valve Seats Angle 44.51-45.01 degrees
Valve Seats Runout (T.I.R.) Max mm 0.025
Valve Arrangement (Front-to-Rear) (Left Hand) E-I-E-I-E-I-E-I
(Right Hand)
I-E-I-E-I-E-I-E
Valve Stem to Guide Clearance?€"Intake mm (Inch) 0.020-0.069
(0.00078-0.00272)
Valve Stem to Guide Clearance?€"Exhaust mm (Inch) 0.045-0.095 (0.0018-0.0037)
Valve Head Diameter?€"Intake mm (Inch) 44.5- (1.75)
Valve Head Diameter?€"Exhaust mm (Inch) 34.0 (1.34)
Valve Head Diameter?€"Gauge Diameters mm (Inch) 42.5- and 32.0
(1.67 and 1.26)
Valve Face Runout Limit mm (Inch) 0.05 (0.002)
Valve Face Angle 45.25-45.75 degrees
Valve Stem Diameter (STD)
?€"Intake mm (Inch) 6.995-6.975 (0.275-0.2746)
Valve Stem Diameter (Std)
?€"Exhaust mm (Inch) 6.970-6.949 (0.274-0.2736)
Valve Springs?€"
Compression Pressure N @
Spec. Length?€"Intake 587.14 N @ 28.02 mm
Valve Springs?€"
Compression Pressure N @
Spec. Length?€"Exhaust 587.14 N @
28.02 mm
Valve Springs?€"Free
Length ( Approximate)?€"
Intake mm (Inch) 49.55 (1.951)
Valve Springs?€"Free
Length (Approximate)?€"
Exhaust mm (Inch) 49.55 (1.951)
Valve Springs?€"Installed
Pressure N @ Spec. Length
?€"Intake 244.64 N @ 40.0 mm
Valve Spring?€"Installed
Pressure N @ Spec. Length
?€"Exhaust 244.64 N @ 40.0 mm
Valve Springs?€"Installed
Pressure N @ Spec. Length
?€"Service Limit 10 % Pressure Less @ 28.02 mm
Valve Springs?€"Installed
Pressure N @ Spec. Length
?€"Out of Square Limit 2 degrees
Valve Guide Inner
Diameter mm (Inch) 7.015-7.044 (0.2761-0.2773)
Rocker Arm?€"Ratio 1.75:1
Valve Tappet?€"Diameter
(STD) mm (Inch) 16.000-15.988 (0.66-0.629)
Valve Tappet?€"Clearance
to Bore mm (Inch) 0.018-0.069
(0.00071-0.00272)
Valve Tappet?€"Service
Limit mm (Inch) 0.016 (0.00063)
Valve Tappet?€"Hydraulic
Leakdown Rate b 5-25 seconds
Valve Tappet?€"Collapsed
Valve Tappet Gap?€"
Desired mm (Inch) 0.085-0.45 (0.0033-0.0177)
Camshaft
Lobe Lift?€"Intake
mm (Inch) 6.58939 (0.2594)
Lobe Lift?€"Exhaust
mm (Inch) 6.58939 (0.2594)
Lobe Lift?€"Allowable
Lobe Lift Loss mm (Inch) 0 (0)
Theoretical Valve Lift @
Zero Lash?€"Intake
mm (Inch) 12.0 (0.472)
Theoretical Valve Lift @
Zero Lash?€"Exhaust
mm (Inch) 12.0 (0.472)
End Play mm (Inch) 0.025-0.165
(0.00098-0.0065)
Journal to Bearing
Clearance mm (Inch) 0.025-0.076
(0.00098-0.003
Journal to Bearing
Clearance?€"Service Limit
mm (Inch) 0.021 (0.0048)
Journal Diameter (All)
mm (Inch) 26.962-26.936
(1.061-1.060)
Journal Diameter (All)?€"
Bearing Inside Diameter
(All) mm (Inch) 27.012-26.987
(1.063-1.0625)
Camshaft Runout
mm (Inch) 0.05 (0.002)
Cylinder Bore
Diameter?€"Surface Finish
(RMS) 0.2-0.6 Microns
Diameter?€"Out-of-Round
Limit mm (Inch) 0.015 (0.0006)
Diameter?€"Out-of-Round
Service Limit mm (Inch) 0.020 (0.00079)
Diameter?€"Taper Service
Limit mm (Inch) 0.006 (0.00023)
Piston
Piston?€"Diameter?€"
Coded Red 1 mm (Inch) 90.177-90.197
(3.550-3.551)
Piston?€"Diameter?€"
Coded Blue 2 mm (Inch) 90.190-90.210
(3.5507-3.5515)
Piston?€"Diameter?€"
Coded Yellow 3 mm (Inch) 90.203-90.223
(3.513-3.5521)
Piston-to-Bore-Clearance
mm (Inch) -0.015 + 0.031 (0.0005-0.0012)
Pin Bore Diameter
mm (Inch) 22.0015-22.004
(0.866-0.8663)
Ring Groove Width?€"
Compression (Top)
mm (Inch) 1.520-1.550 (0.06-0.610)
Ring Groove Width?€"
Compression (Bottom)
mm (Inch) 1.520-1.530 (0.060-0.0602)
Ring Groove Width?€"Oil
Ring mm (Inch) 6.996-7.224 (0.275-0.2844)
Piston Pin?€"Length
mm (Inch) 61.93-62.05 (2.44-2.443)
Diameter mm (Inch) 21.994-21.999
(0.866-0.8661)
Pin to Piston Clearance
mm (Inch) 0.005-0.010
(0.0002-0.0004)
Pin to Rod Clearance
mm (Inch) 0.015-0.040
(0.0006-0.00157)
Piston Rings?€"Ring Gap
?€"Compression (Top)
mm (Inch) 1.0 MAX (0.0394)
Piston Rings?€"Ring Gap
?€"Compression (Top)
mm (Inch) 1.0 MAX (0.0394)
Oil Ring?€"Side Clearance
mm (Inch) 1.25 MAX (0.05)
Oil Ring?€"Compression
(Top) mm (Inch) 0.040-0.090
(0.0016-0.0031)
Oil Ring?€"Compression
(Top) mm (Inch) 0.030-0.080
(0.0012-0.00031)
Oil Ring Snug Fit
Oil Ring?€"Service Limit
mm (Inch) 0.015 MAX (0.0006)
Ring Gap?€"Compression
(Top) mm (Inch) 0.23-0.49
(0.01-0.02)
Ring Gap?€"Compression
(Bottom) mm (Inch) 0.23-0.49
(0.01-0.02)
Ring Gap?€"Oil Ring (Steel
Rail) mm (Inch) 0.05-0.66 (0.006-0.026)
Lubrication System
Oil Capacity?€"Automatic
Transmission (Quarts U.S.) 6.675?±0.125
Oil Capacity?€"Manual
Transmission (Quarts U.S.) 6.425?±0.125
Cylinder Block
Main Bearing Bore
Diameter mm (Inch) 72.401-72.422 (2.85-2.851)
Crankshaft and Flywheel
Main Bearing Journal
Diameter mm (Inch) 67.483-67-503 (2.65-2.657)
Connecting Rod Journal?€"
Diameter mm (Inch) 52.988-53.003
(2.0861-2.0867)
Crankshaft Free End Play
mm (Inch) 0.130-0.301 (0.0051-0.012)
Crankshaft Runout to Rear
Face of Block mm (Inch) 0.050 MAX (0.002)
Connecting Rod Bearings
Clearance to Crankshaft?€"
Desired mm (Inch) 0.027-0.069 (0.001-0.0027)
Clearance to Crankshaft?€"
Allowable mm (Inch) 0.027-0/069 (0.001-0.0027)
Bearing Wall Thickness
(STD) mm (Inch) 2.44-2.452 (0.096-0.0965)
Main Bearings
Clearance to Crankshaft?€"
Desired mm (Inch) 0027-0.065
(0.0011-0.0026)
Clearance to Crankshaft?€"
Allowable mm (Inch) 0.027-0.065
(0.0011-0.0026)
Bearing Wall Thickness
(STD) mm (Inch) 1.920-1.928 (0.075-0.076)
Connecting Rod, Piston and Rings
Connecting Rod?€"Piston
Pin Bore Diameter
mm (Inch) 21.959-21.979
(0.864-0.865)
Connecting Rod?€"
Crankshaft Bearing Bore
Diameter mm (Inch) 56.756-56.876 (2.234-2.24)
Connecting Rod?€"Length
(Center-to-Center)
mm (Inch) 150.7 (5.93)
Alignment (Bore-to-Bore
Max. Diff.) c ?€"Twist
mm (Inch) 0.050 per 25 (0.0015-0.984)
Alignment (Bore-to-Bore
Max. Diff.)?€"Bend
mm (Inch) 0.038 per 25 (0.0015-0.984)
Side Clearance (Assembled
to Crank)?€"Standard
mm (Inch) 0.015-0.45 (0.0006-0.0177)
Side Clearance (Assembled
to Crank)?€"Service Limit
mm (Inch) 0.05 MAX (0.02)
Crankshaft Main Bearing
Journal Taper mm (Inch) 0.020 (0.0007)
Crankshaft Main Bearing
Journal Runout mm (Inch) 0.05 (0.002)
Crankshaft Connecting Rod
Journal Taper mm (Inch) 0.015 (0.0006)

Feb 15, 2011 | 1998 Ford F150 Regular Cab

1 Answer

2009 Suzuki Hayabusa 1300 replace the clutch lever


Hi, Dglover26 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.instructables.com/id/Replacing-Clutch-and-Brake-levers-on-motorcycle
Gen 1 hayabusa clutch lever removal and installation
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Apr 16, 2010 | 2009 Suzuki Hayabusa 1340

4 Answers

1994 Suzuki King Quad Timing Specs?


I need a manual or specs how to set the timing on a 93 Suzuki King Quad 300 ATV. Timing chain broke, bought a new one, jumped time. Need help.

Jan 08, 2009 | 1994 Suzuki DR 350 S

Not finding what you are looking for?
2009 Suzuki Hayabusa 1340 Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...