Question about 2005 Husqvarna TE 450

1 Answer

When i press the start buttom it's not doing anything just i hear a click sound coming out from where the fuse is., so i got use foot starter. hanks if anyone knows what it could be...

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 167 Answers

The sound your hearing is proberbly the click of the starter solinoid.
Nothing else happens hay?
This sounds like your starter motor is faulty!
To do a quick test try placing a jumper lead from your Battery POSATIVE straight to the starter motor cable.(there may be a spark but don't be too scared). Hold there for a couple of seconds.
If you don't hear the starter motor spin you have a shot starter motor.

This should help
Regards Andrew Porrelli

Posted on Dec 08, 2009


1 Suggested Answer



Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 Suzuki eiger starter button doesn't do anything

Hey Brad
With the info you have provided, it seems to point to the ignition switch as the problem. (the clicking you should hear comes from the solenoid contacts - not the starter button). There is probably one wire in the switch that has broken or come unsoldered or other wise not making the right connection.

Jun 12, 2017 | Suzuki 2004 Eiger 400 4X4 Manual

1 Answer

1994 plymouth voyager wont start - dash lights turn on but no starter/solenoid sounds.

It could be the neutral safety switch, but if the starter was not working correctly before now, it could be the starter or solenoid.
You would need to check for voltage at the starter and work back to the key switch as needed.

Jan 21, 2013 | 1994 Plymouth Voyager

1 Answer

Car won't start all lights come on thinking it is a fuse for starter?

When you do turn the ignition switch if you do not hear anything is possible the starter motor solenoid.,check also the battery terminals for miss contact,remove and brush the dirt between , or bad earth.

Aug 26, 2012 | 2008 Ford Focus

2 Answers

2005 Altima won't start, hear clicking sound coming from fuse box,key stuck in ingintion,won;t turn over,tried to jump start.

the clicking that you hear is coming from the starter relay. sounds like your ignition starter switch or ignition lock cylinder is bad.

May 30, 2012 | 2005 Nissan Altima

4 Answers

My 92 600 katana wont start. It wont even turn over, when i press the start nothing happens. the battery is good i charged it up and all the lights work but it still wont turn over.

If the clutch switch, the neutral safety switch, and the side stand switch are all working correctly, then test the starting system. When you push the starter button you should hear a click , so you know the button is working.Follow the positive battery cable to the starter solenoid. Disconnect the two wires that activate the solenoid, test the two wires from the harness make sure the needle on your voltage meter jumps when you push the starter button, this means the button is good. Take a wire and jump the two posts on the solenoid or touch the two cables together. If your starter works, then you need a new solenoid. If you hold the starter button and tap on the starter with a plastic hammer and the starter works you need new starter brushes. Anything else wrong with the starter and you need to replace the starter assembly , the manufacturer does not make replacement parts for the starter.

Jul 28, 2011 | 1992 Suzuki GSX 600 F (Katana)

1 Answer

My blazer will not start, the lights come on cd player works but when you go to turn the key over it does not make the clicking sound so i know its not the battery. But why won't it turn over and start?

This issue happens a lot with these vehicles.

What you may want to do is this; Put your key in the 'Run' Position, not 'Start', and press on the Brake, then move the shifter all the way towards the back, so the red marker is on the '2'. Then, remove your foot from the break, and then move the shifter all the way back to the Park position. Next switch your key back to the 'Off' position.

Now, try to start your car.

If it starts, the issue was that you did not have the shifter all the way in the Park position. If it does not want to start, check your fuse box and see if you have a blown fuse. (Make sure if you replace a fuse that you replace it with the same type and rating).

If the fuses look OK, then you may have an issue with the starter solenoid. Turn the key back go the Off Position, slowly turn the key to the On Position, slowly. Listen carefully. You should hear at least a 'click'. This is the solenoid engaging but not turning. If you hear that click, then turn the key to the Start Position. If it doesn't turn over, the issue may be with the Starter.

Fortunately, the Starter has the Starter Solenoid attached to it and it normally comes as one unit. There are two bolts that hold the Starter in place. Make sure, if you are going to change out the Starter, that your remove the Positive Battery Cable from the Battery. The Positive Battery Cable goes directly to the Starter. If you don't remove that cable from the Positive Battery Post/Terminal, you may cause an arc under the engine. Trust me, you don't want to do that.

Let me know if that helps..

Nov 22, 2010 | 2002 Chevrolet Blazer

1 Answer

Yamaha v star 1100 every time i push starter buttom i hear click in the small box with 2 30 amp fuses but starter do not engaging

first check battery for full charge 12.5 to 14 volts. second corroded battery cables can cause this symptom.third check connections to battery and starter and ground are clean and tight. fourth, click in small box maybe a malfunctioning starter relay- you can ask dealer if your bike has one. last possible starter failure.

Jun 13, 2010 | 2007 Yamaha V Star Custom

Not finding what you are looking for?
2005 Husqvarna TE 450 Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6151 Answers

richard libby

Level 2 Expert

209 Answers

Joshua Jennings

Level 2 Expert

85 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides