If you cleaned and set the gap on your points check and make sure the you are getting power up to the points follow the path with your test light.
Power at points?
NO= follow the path to what every is not letting the power pass, fuse, broken wire ect..
YES = power out to coil?
NO=something is wrong with points may not be closed spin motor slowly stil nothing check that they are closing
YES = dose your test light flash when you spin the motor with test on the power wire at coil
NO= points are not opening adj and try agine
YES= change cond. and check for spark
Good Luck
Mark
C.C. Motorsports
317 views
Usually answered in minutes!
×