Took apart fuel sytem and can not remember how to

You need to drop the pan only and pressure check the cooling system. This water could be from a cracked engine block.

There gunna be drum , remove cables from hub ., remove front axle and tire.,. Remove circular drum from hub
,.,replace/rebuild brake workings.,the same way you remove them .,.replace parts back together and put back on trike.,. It's fairly simple if you are mechanicaly inclined at all and know drum brakes.,.and old trikes remember always put stuff back together the exactly the same way you remove them..

One shouldn't take things apart if one cannot re-assemble them :D
Take it to your local vac shop.

i needed to replace my blade - my husband replaced it but it would not cut so we took it apart and cant figure out how to put it back together. nothing helpful on line.
did anyone have a link how to put all the pieces back together to create the blade? thanks

have u made sure the floats have not got stuck

hi mate check the coils there are a coil for each plug no 4 cylinder coil could be gone

I have a 1982 CB750C the manual says the quantity is the same for all bike before 1982 it says 6 ounces for the air assist fork models. this is from a clymer manual i recently bought. Highly recommend getting one

I guess you will have to synchronize the carbs.
Check the float levels too in all the carbs.
Check the valve clearance.
Check the carburator intake mounting rubbers for leaks.
Hope this helps!

remember the last thing you took off and start there,work your way in reverse towards the first thing you took off