Where is the bleeder valve for 1996 Vulcan Classic-A 1500 clutch?
It is under the left engin cover. You have to remove the shifter and the footpeg or floorboard too. Then remove the 4 or 5 allen bolts and the cover will come right off. No oil or anything will leak when this cover is removed. You will see the clutch slave cylinder behind this cover. I found the best way to bleed the clutch is to fill the master and open the slave and let it drip for a while (gravity bleed) Do not let the cylinder at top run low while you are doing this. After a 10 minutes or so, tighten slave then refill cylinder and do the old pump and drain bleed a few times. I found that it works better with the cover installed on the cylinder when pumping to bleed clutch.
5,456 views
Usually answered in minutes!
×