2002 CR 250 R cylinder head bolt torque specs

SOURCE: Need cylinder and cylinder head torque specifications 98 XR 250

you dont need torque specs on that just use a 1/2 inch drive with you 14mm or16mm socket hold the wratchet right at the top and tighten it as tight as you could get it like that then use wratchet in normal position and just give it a little snugg it will be perfect i have done it a million time on the same type of bikes...

SOURCE: 91 kx 250 torque values

Engine Top End:
Auto Decompressor Bolt 104 in·lb
Cylinder Head Cover Bolts 87 in·lb
Cylinder Head Bolts: M10 36 S
M6 104 in·lb S

the S in that means the specified pattern ... just like tightening car tire bolts... please note all that it its INCH lbs....

don't know why it says just 36 for the M10 bolts unless they left out inch lbs

Anything else let me know as i've got a manual for the 250 f... actually i've got a few different ones

Robert

Please take a moment to rate this solution as i've taken a few minutes to find the manual thanks

SOURCE: Need torque wrench settings for cylinder head bolts

try here http://www.manualz.info/

hope this helps

SOURCE: need torque specs for 98 yz 250,rebuilding engine

Go to the site below and you can download a free srevice manual for your bike.

http://www.carlsalter.com/motorcycle-manuals.asp

Top rating due on this answer!

SOURCE: how do i find out what year the used honda cr 250

http://images.cmsnl.com/img/partslists/vin-table-cr250r-2000-us_bighu0377vin_7db4.gif
http://images.cmsnl.com/img/partslists/serial-numbers-cr250r-2000-us_bighu0377serial2_6441.gif



Check out these two links. It looks like you will need to call a dealer with the engine # to get the year exactly. The engine number matches a portion of the VIN which will identify the year.