Rear brake light not working on 2000 HD Road King....New bulb and new brake relay fuse...Where is the brake switch located?
There are two brake light switches. One is in the right handlebar switch housing. This is front brake light switch and is a simple push button type switch actuated by the front brake lever.
The other switch is a pressure switch and it is located in a Tee usually somewhere under the bike near the rear of the transmission. Follow the metal tube coming out of the rear of the master cylinder. It will go back towards the rear brake. Somewhere in that line there will be a tee with the pressure switch in it. If you jumper across this switch, the brake light should work. If it does work when you do this but not work when you depress the rear brake signal, replace the rear brake light switch.
Good luck
Steve
1,681 views
Usually answered in minutes!
×