Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic
Hi Drunkskunkjd, for a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Jun 21, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1.cover the tank with towls beachtowls 2.remove switches,unbolt both ,clutch and front brake from bars,leftside grip pry under it with a flat crewdriver and spray under it with hairspray and turn on it to make it come off, right side loosen the bars and move them so when you loosen the rightside it can come right off.unbolt the bars from center of the bars
Posted on Mar 27, 2009
Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.
0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.
All in all a pretty easy (but possibloy messy) job.
Posted on Jun 06, 2009
Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone apply pressure on the brakes while you have them off the bike or you will have a mess and/or a problem.
Posted on Jun 21, 2009
Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
Posted on Jun 28, 2009
To remove the ignition switch turn the handle bar fully to the right, turn the ignition switch to access position and with the key in the switch depress the tab under the switch with a small screwdriver (the tab is to the lower left under the knob) and while pressing down on the key, turn the key counterclockwise about 60 degrees. At that point the switch will pull out of the housing.
Posted on Nov 17, 2009
Tips for a great answer:
Jun 26, 2017 | 2000 Harley Davidson FLHTCUI Electra Glide...
Aug 23, 2015 | 2000 Harley Davidson FLHTCUI Electra Glide...
Jul 16, 2014 | 2000 Harley Davidson FLHTCUI Electra Glide...
Aug 23, 2013 | 2000 Harley Davidson FLHTCUI Electra Glide...
Jul 31, 2012 | Harley Davidson FLHTCUI Electra Glide...
Jul 24, 2012 | 2000 Harley Davidson FLHTCUI Electra Glide...
Jul 19, 2012 | 2000 Harley Davidson FLHTCUI Electra Glide...
Jul 09, 2012 | 2000 Harley Davidson FLHTCUI Electra Glide...
Jul 17, 2011 | 2000 Harley Davidson FLHTCUI Electra Glide...
Sep 10, 2009 | 2000 Harley Davidson FLHTCUI Electra Glide...
697 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: