What is the oil capacity in the crankcase of a 1993 800cc intruder. How much do you fill it too? I stuck my finger in and got no oil and there is no measure dip to tell.

hhListed below are engine crankcase dil fill quantities: • Saran-Built Engines OEM Dipstick Tube Crankcase Oil Engine Model Option Code(s) Capacity CD3029DF 4001,4002 6.0 L (6.S qt) CD3029DF 4003,4022 6.0 L (6.S qt) CD3029TF 4001,4003,4023 8.0 L (8.S qt) CD3029TF 4002 6.0 L (6.S qt) CD3029TF 4021 8.S L (9.0 qt) CD4039DF 4001,4002,400S 8.S L (9.0 qt) CD4039DF,TF 4003 12.0 L (12.S qt) CD4039DF 4004' 9.0 L (9.S qt) CD4039DF 4004 14.S L (1S.S qt) CD4039DF 4006,4010,4019 8.S L (9.0 qt) CD4039DF 4011 13.0 L (14.0 ql) CD4039TF 4002 13.S L (14.S qt) CD4039TF 4004,4013 14.S L (1S.S qt) CD4039TF 400S,4006,4020 12.S L (13.0 qt) CD4039TF 4007 13.0 L (14.0 ql) CD4039TF 4008,4012 11 .S L (12.0 qt) CD404SDF,TF 4003 12.0 L (12.S qt) CD404SDF 4004 9.0 L (9.S qt) CD404STF 4007 1S.0 L (16.0 qt) CD404STF 4020 12.S L (13.0 qt) CD60S9DF,TF 4001,4004 17.0 L (18.0 ql) CD60S9DF,TF 4010,4012 17.0 L (18.0 qt) CD60S9DF 400S 14.0 L (1S.0 qt) CD60S9DF,TF 4006,4008 20.0 L (21.0 qt) CD60S9DF,TF 4007,4011,401S 1S.0 L (16.0 ql) CD60S9TF 4009 14.0 L (1S.0 qt) CD6068DF,TF 4010 17.0 L (18.0 ql) • For engine base code 1476F only Crankcase oil capacity may val}' slightly from amount shown. ALWAYS fill crankcase to full mark or within crosshatch on dipstick, whichever is present. DO NOT overfifl. 96 • Dubuque-Built Engines OEM Dipstick Tube Engine Model Option Code(s) T04039DF 4001 T04039DF 4002 T04039DF,TF 4004 T04039DF,TF 4006 T04039DF 4007 T04039DF 4012 T04039DF,TF 4013,4014 T04039TF 4001 T04039TF 4007 T0404SDF 4001,4002 T0404SDF 4003 T0404SDF,TF 4004 T0404STF 400S T060S9DF,TF 4001 T060S9DF 4002 T060S9DF,TF 4004 T060S9DF,TF 400S T060S9TF 4007 T06068DF,TF 4001 T06068DF,TF 4004 T06068DF 400S Crankcase Oil Capacity 9.S L (10.0 qt) 9.0 L (9.S qt) 13.S L (14.S qt) 13.0 L (14.0 qt) 8.S L (9.0 qt) 13.0 L (14.0 qt) 11.S L (12.0 qt) 13.0 L (14.0 qt) 12.S L (13.0 qt) 9.0 L (9.S qt) 13.0 L (14.0 qt) 13.S L (14.S qt) 13.0 L (14.0 qt) 19.5 L (21 .0 qt) 11 .S L (12.0 qt) 19.0 L (20.0 qt) 24.S L (26.0 qt) 17.0 L (18.0 qt) 19.0 L (20.0 qt) 19.0 L (20.0 qt) 24.S L (26.

Gehl 553 Specifications Forkliftaction com

https://www.deere.com/en_INT/docs/product/equipment/industrial_engines/tier_3_stage_3_a/tier_3_stage_3_a_pocket.pdf

Engine Oil Recommendations

Use 4-stroke oil, or equivalent high detergent, premium

quality motor oil certified to meet or exceed U.S. automobile

manufacturer's requirements for API Performance

Class SF or better. SAE 15W-40 is recommended for general,
all-temperature use.

NOTICE

Engine oil is a major factor affecting engine performance

and service life. Non-detergent and 2-stroke engine oils will

damage engine and are not recommended.

• Be sure to use engine oils specified under "Engine Oil

Recommendations."

It is very important to maintain proper level of engine oil to

keep engine in good running condition.

• Check engine oil level prior to each use. Refill engine

oil if oil level is low.

FIGURE 17: Recommended Oil Viscosity

Crankcase pressure can cause hot engine oil to

spray out of engine fill hole. Hot engine oil can

cause severe burns.

• ALWAYS stop engine before removing the oil fill cap.

15W-40

WARNING

FIGURE 18: Oil Fill Cap Removal

FIGURE 19: Oil Fill Measurement

Oil Capacity [qt / ml]

HW1000i 0.26 / 250

HW2000i 0.48 / 450
TABLE 4. Engine Oil Capacity

Engine oil:
Fill the crankcase with the recommended oil. Capacity: 0.73 US qt (0.69L) at oil and filter change Tansmision oil: Fill the crankcase with recommended oil. Capacity: 0.62 US qt (0.59L) at oil change.

Your title description says 2003. Is your bike a 2003 or a 1996? If your bike does not have a dipstick on the filler, there may be a sight glass on the crankcase. If this is the case, the sight glass will be low on the right side of the crankcase. In order to ge an accurate estimate of your oil level, the bike must be level, not on the side stand.

Please let me know if this is helpful.

On the oil filler port is a number with CC after it. This is the crankcase capacity in cc. There are 946cc in one US quart. Do not neglect to fill the filter with oil (but do not overfill) before installing it, and do not consider that amount when filling the crankcase.

Hope this helps,
matt

Fill the filter with oil (but do not overfill it) and in stall it. The capacity of the crankcase is stamped on the oil filler hole in CC. there are 946cc in one US quart.

Hope this helps,
matt

Use 10w40 motor oil in the gear box. Don't use any synthetic lubricants, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If in a hot area like Texas or New Mexico go with 20w50.

I don't have a service manual on your particular bike so just check oil quantity with the dealer when you go to buy the new oil filter. Don't forget to lube the cables and chain when doing the oil change.

The factory fill is 4.3 litres. Thats new empty lines...etc.
3.75 to 3.9 quarts is a normal drain.
Heres a link for the complete service manual on the VTX 1800C
It's a big download about 50MB in PDF format
Hope this helps...ride safe and ride smart.

I have a 2hp craftsman air compessor with a two cylinder pump, Here is the info from my manual as far as oil capacitity:

Remove oil fill plug and slowly add
a compressor oil until it is even with the
top of the oil fill hole. NOTE: Do not
allow oil to be lower than 3/8"
from the top at any time. When filling
the crankcase, the oil flows very slowly
into the pump. If the oil is added too
quickly, it will overflow and appear to
be full. NOTE: Crankcase oil capacity is
approximately 16 fluid ounces.

I buy my compessor oil from Lowes in the tool department. It comes in 16oz and sells for about $3. I wouldnt worry about how many ounces it holds but rather that the oil level is to top of filler hole. Lowes also sells a synthetic oil for about $7 and is recommended for severe conditions (hot / cold / used all day). Good Luck!

Use 10/30 weight oil fill till : " if it has a "dipstick" fill to middle of hash marks" if not, There in the hole for the oil filler cap their is a knotch cut out of the theads for that cap. fill to just below the top of that knotch . drain plug on bottom of crankcase