SOURCE: Replaced bars on my 1994 Intruder 1400....now it won't start?!?!?
commen thing with bikes when disturbing the wiring loom !
it may have a loose or dirty connector
someitmes its a break inside the wiring when that you wont see!
check the grounding & ignition curcuits
SOURCE: 1982 Suzuki GS850 GL will only run with the starter button held
Obviously the CDI is picking up power from the starter button. Check the ignition key switch for proper operation. Chances are that whatever fried the loom also fried part of the switch. Alternate to that, trace the wire powering the CDI system, disconnect it at the source (starter button connection), then find a power source that is live only when the key is turned on and then hook the CDI wire up there.
an I get a “very helpful” rating on this answer?
SOURCE: Troubleshooting 2005 Suzuki Boulevard C50 Motorcycle, Support & S
there is a set of fuses ....... when standing facing the side of the bike that has the clutch on it.... look down at the section of bodywork rearmost (closest to the rear wheel) this section can be unscrewed. in this you will find the relay for the starter motor and the indicators. as well as a small box type containing a number of fuses.
SOURCE: 2004 SUZUKI SAVAGE LS650 S40 ELECTRICAL PROBLEM
Many eletrical units on motorcycles need testing equipment that only dealers habve ,my advice is to take the bike to a electrician ,he will test each component and eliminate the parts that are working coprrectly .otherwise you could be searching for days to solve this problem .it maybe a simlpe thing like a basd earth .
SOURCE: suzuki intruder vs800gl Light problems
Have you check all the bulbs condition? Check your fuses and the blinker coil.
107 views
Usually answered in minutes!
×