Question about 1995 kawasaki VN 750 Vulcan

1 Answer

I have a 1995 vulcan 750cc, the head light don't come on

I have a 1995 kawasaki vulcan 750cc, the head light don't work sometimes? It's a new bulb. When I turn the key on the light does not come on some times even after I start the motor? Is in the ignition switch or is there a relay problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 867 Answers

Sounds like a loose wire or a rusted ground connection.check all connections pertaining to light

Posted on Jul 02, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Kawasaki Vulcan 2000 Classic LT tail light not working


Hi, Paul tail light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tail lights not working Kawasaki Vulcan Forum Vulcan Forums Rear Lights Help
Kawasaki VULCAN 2000 Service Manual
OEM Parts for Kawasaki
2007 Kawasaki Vulcan 2000 Classic LT Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 16, 2018 | 2007 kawasaki Vulcan 2000 Classic LT

1 Answer

2007 Kawasaki Vulcan 1600 Nomad tail light doesn't work


Hi, Anonymous and the usual suspects are:
1. Both bulb elements burned out.
2. Faulty rear fender wiring harness connector.
3. Rear wheel has worn through the wire harness.
4. Tail light housing socket not grounded.
5. Bulb contacts are worn out not making contact.
6. Socket housing contacts are broken.
7. Socket housing contact pad spring collapsed.
8. Socket housing contact pad stuck.
8. Light fuse has blown.
9. Faulty or corroded ignition switch.
10. Faulty wiring from the ignition switch to the rear fender wiring harness.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Brake light not working Kawasaki Vulcan Forum Vulcan Forums HELP Tail light and brake light will not work
Kawasaki VULCAN 1600 NOMAD Service Manual
OEM Parts for Kawasaki
2007 Kawasaki Vulcan 1600 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 22, 2014 | 2007 kawasaki Vulcan 1600 Nomad

1 Answer

2001 Kawasaki VN 800 Vulcan Drifter wiring diagram


Hi, Anonymous if your headlight is not working, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil.
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2001 Kawasaki VN 800 Vulcan Drifter wiring diagram Google Search
Kawasaki Motorcycle Wiring Diagrams
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 08, 2017 | 2001 kawasaki VN 800 Vulcan Drifter

1 Answer

2002 Kawasaki VN 1500 Vulcan Classic headlight does not work


Hi, Anonymous if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Headlight not working help please
Headlight does not come on Kawasaki Vulcan 750 Forum Kawasaki VN750 Forums
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 14, 2014 | 2002 kawasaki VN 1500 Vulcan Classic

1 Answer

1998 Kawasaki VN 1500 Vulcan Classic headlight not working


Hi, Anonymous if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Headlight not working help please
http://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/45504-headlight-problem-vulcan-1500-a.html
http://www.vulcansabs.com/wp-content/uploads/2016/04/Kawasaki-Vulcan-VN1500-Nomad-Classic-Tourer-1998-1999-Service-Manual.pdf
OEM Parts for Kawasaki
1998 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 01, 2013 | 1998 kawasaki VN 1500 Vulcan Classic

1 Answer

2008 Kawasaki Vulcan 1600 Mean Streak rear running lights not working


Hi, Anonymous tail light and running light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
rear running lights Kawasaki Vulcan Forum Vulcan Forums
https://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/140548-rear-lights-dont-turn-but-rear-blinkers-work-help-mean-streak.html
KAWASAKI VN1600 MEAN STREAK Service Manual
OEM Parts for Kawasaki
2007 Kawasaki Vulcan 1600 Mean Streak Owner Manual

Nov 10, 2012 | 2008 kawasaki Vulcan 1600 Mean Streak

1 Answer

2009 Kawasaki Vulcan 900 Custom tail light not working


Hi, Anonymous tail light and running light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tail lights not working Kawasaki Vulcan Forum Vulcan Forums https://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/143955-tail-lights-out-blinkers-plate-brake-work.html#post2175291
Kawasaki VN900 Custom Service Manual
Kawasaki Vulcan 900 Custom Owner Manual

Jul 29, 2012 | 2009 kawasaki Vulcan 900 Custom

1 Answer

2003 Kawasaki EN 500 Vulcan Classic tail lights not working


Hi, Eric tail light and running light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tail lights not working Kawasaki Vulcan Forum Vulcan Forums
https://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/34906-taillight-running-light-wont-work.html
Kawasaki EN500 Vulcan 500 LTD Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Jul 05, 2012 | 2003 kawasaki EN 500 Vulcan Classic

1 Answer

1996 Kawasaki Vulcan VN800 headlight not working


Hi, Don if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Headlight not working help please
headlight not working Kawasaki Vulcan 750 Forum Kawasaki VN750 Forums
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 06, 2012 | 1996 kawasaki VN 800 A Vulcan

1 Answer

I have a 2005 Kawasaki Vulcan 800 and the headlight suddenly stopped working. I looked for fuses and can't find any. The headlight appears to be good. Any suggestions?


you can remove the head light bulb, power the bulb with a charger or check it with voltmeter. if bulb is good, make sure the ground is good on the light housing. if fuses are good, could be the actual switch on the handlegrips

Jun 24, 2009 | 2005 kawasaki EN 500 Vulcan

Not finding what you are looking for?
1995 kawasaki VN 750 Vulcan Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...