Question about 2003 Husqvarna CR 250

1 Answer

Fork oil capacity 2003 Husqvarna CR 250

How much fork oil do I need in my Husqvarna CR 250 @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husqvarna Master
  • 59,350 Answers

Hi, Lisa27 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://dirtrider.net/forums3/threads/03-cr250-fork-oil.133222/
https://www.youtube.com/watch?v=xzn6K8qywQM
https://www.manualslib.com/manual/954824/Husqvarna-Cr-125-2011.html
https://www.bikebandit.com/husqvarna-motorcycle-parts
https://www.manualslib.com/manual/980352/Husqvarna-2013-Cr-125.html

Posted on Nov 09, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
robotek

Graeme Ross

  • 1512 Answers

SOURCE: front fork oil capacity

Hi
You can download the whole workshop service manual that has this info and heaps more from here. Hope this helps Thanks for using Fixya. 
regards robotek

Posted on Jan 10, 2009

Anonymous

  • 7 Answers

SOURCE: fork oil to purchase

10w or 15w is you want a stiffer response

Posted on Apr 19, 2009

Anonymous

  • 1 Answer

SOURCE: YZ 250 F 2007 Fork oil level

how do i check my oil level on my yz 250

Posted on Oct 22, 2009

hawk127311

CURT

  • 350 Answers

SOURCE: how much 5w oil goes into each fork?

Using 5w oil with stock springs, your oil level should be about 100mm from the top with the fork fully compressed, damper rod pushed all the way down, and the spring out. I hope this helps and good luck. Please vote and leave a message.

Posted on Oct 30, 2009

wayneman01

Wayne Thomas

  • 301 Answers

SOURCE: Amount of fork oil for a XR 250 1985 model with 10

13.4 ounces in each one. Or, with the fork spring removed and the forks compressed all the way, the oil level should be 150 mm (5.91") from the top of the fork tube.

Posted on Nov 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 wr250 husqvarna fork oil capacity


Hi, Richard for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Oil for Husqvarna WR WR 250 2004 2009 Which oil is the best Professional...
Husqvarna WR250
http://docs.wavenetworks.us/manuals//2009-2010%20WR%20250-300.pdf
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
http://mybikemanuals.com/husqvarna/husqvarna-uncategorized-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 24, 2017 | 2009 Husqvarna WR 250

1 Answer

2004 Honda CR 250 R fork oil capacity


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2004 cr250r fork oil capacity
03 CR250 Fork oil levels
CR250 2002 2003 pdf
http://www.partsfish.com/page/oem-parts-for-honda
http://owners.honda.com/assets/ownerlink/model/own_man/powersports/2007/2007_cr250r.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 28, 2014 | 2004 Honda CR 250 R

1 Answer

2002 Honda CR 250 R fork oil capacity


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How much fork oil 02 CR250
2002 cr250 fork oil capacity
CR250 2002 2003 pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CR250R Owner Manual Competition Handbook

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 17, 2013 | 2002 Honda CR 250 R

1 Answer

I have a 2003 Honda CR250r and recently replaced my fork seals and fork oil. I checked the manual and the oil level says 325-405 depending on stiffeness wanted. I went for 375 and now my forks are pretty...


Hi, Robinpereira my gut tells me you either your fork oil is too heavy or you put too much in. Drain the forks and measure what comes out if it;s way over specs adjust as necessary if it's exactly what you put in then replace 350cc and see how that works.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2004 cr250r fork oil capacity
SHOWA FORK seal replacement CR 250 pt 1
SHOWA FORK seal replacement CR 250 PT 2
CR250 2002 2003 pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CR250R Owner Manual Competition Handbook

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Jun 03, 2017 | 2003 Honda CR 250 R

1 Answer

How much fork oil does the bike hold? honda cr 250r 2003


try abt 15mm from top of fork or 250-400cc depending how much rebound stiffness.you wanted

Mar 27, 2010 | 2003 Honda CR 250 R

1 Answer

I need help installing transmission in 2002 husqvarna cr250 where nutral is on shift drum and where the shift forks go


Ask your dealer the question if you know how to fix it, or Google it or get a repair manual

Mar 23, 2010 | 2002 Husqvarna CR 250

1 Answer

2002 Honda CR 250 R fork oil capacity


Hi, G_ix_erboy for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How much fork oil 02 CR250
97 01 Honda CR250 Front Fork Suspension Specifications Fix Your Dirt Bike
CR250 2002 2003 pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CR250R Owner Manual Competition Handbook

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 14, 2010 | 2002 Honda CR 250 R

1 Answer

01 husqvarna cr250 fork seal problems? any advice on how to do them?


by problems I assume you mean leaking ? if so then try this trick first
1- pull the fork wiper off just pry it out of the bottom of the fork "carefully" slide it down the fork tube
2- take a piece of rigid thin plastic 3/4 -1 inch (a piece of 35 mm film works perfect) slide it up between the fork tube and the seal go in about an inch or so you may have to wiggle it around a bit but it'll go, oil will run out (yes all over your hand) slide the plastic all the way around the fork twice is enough it will flush the dirt from between the seal and the fork if you want to get fancy spary contact / brake cleaner up there at the same time spray the fork wiper and push it back into place use the rest of the brake cleaner to get the oil off the fron brakes ...works 99% of the time if you want the fancy kit it's called fork seal saver kit at a motorcyle dealer near you . if that doesn,t work then you may actualy need new seals depending on your riding skill level.. properly working suspension is very important ..if the fork seals are gone chances are the internal valve needs some tlc as well rebound and dampening are controled internaly takes special equipement and knowledge to do it right.. find a bike shop and let them do what they do ..ride safe

Oct 09, 2009 | 2002 Husqvarna CR 250

1 Answer

What is the fork oil level after replacing seals


Here is a manual for your bike....search for English parts of it.....
http://safemanuals.com/user-guide-instructions-owner-manual/HUSQVARNA/CR%20125-_M

The manual has directions for taking out parts, putting in SAE 5 or SAE 7.5 fork oil, and then measuring the distance from the top of the fork tube to the top of the oil. It should be 3.5 inches. That doesn't sound right, but maybe that is with the forks compressed, the directions may be indicating that. You could judge by the amount you drained out of the forks. Here are the directions in the manual.......
OIL FORK LEVEL
For the regular fork operation,
both legs must be provided with
the necessary oil quantity.
Remove the forkrods from the
fork to check the oil level inside
the forkrods. Work as follows:
- remove the power rod caps;
- remove springs from the stems
letting the oil drop into the
latter;
- bring forks to stroke end;
- check that the level is at
distance “A” below the upper
limit of rods.
(distance A is 3.5 inches)

Oct 03, 2009 | 2002 Husqvarna CR 125

1 Answer

What are the stock suspension settings for a 2003 Honda CR 250 R?


set your compression out 10 or 11 your rebound 9 or 10 and your fork oil height to roughtly 380cc.since its in 03 u should drain the fork oil out, u have to unscrew the top cap of the fork while its in the triple clamps( because its easier this way), loosen then take the fork out of the clamps, unscrew the top caps and pull the fork tube down and turn the fork upside down to drain the oil out then hang the forks up upside down for about 15 minutes then add the new oil right in the fork tube were you'll see a spring, just add the oil in there and you'll be fine and u should replace it with a good medium weight oil

Feb 04, 2009 | 2003 Honda CR 250 R

Not finding what you are looking for?

Open Questions:

0 Answers

FZR 400R Deltabox Exup. wont idle properly Howzit everyone. I have a "small" issue with my FZR 400R Deltabox Exup. So it doesn't want to idle properly(the moment I reduce the idle speed to any point below 3000rpm it continues to drop and dies) and also revving the bike it bogs around 6000rpm doesn't go any higher. When restricting the airflow through the airbox it revs better(all the way to 14k rpm) but still doesn't want to idle as the revs then hang on it's way down. I suspected this was all caused by an air leak somewhere, sprayed some quick start on the boots between the carbs and the intake as well as between the airbox and the carbs with no jump in the revs. Nevertheless I sealed the boots just to make sure they aren't the problem. I then stripped the carb and cleaned it properly, put everything back together, sorted out their syncing and reset the mixture screws to 3.5 turns out(which sounds a bit far out, but thats what the manual said-since then I've tried everything from 0.5 to 4 turns out with no significant effect). Then the cylinder started acting up(not firings- a different cylinder about every third time the bike was started) I then replaced the spark plugs with new ones(NGK cr9ek as per the manual) after that cylinder 1,2 and 3 was firing, but 4 was still dead. I Replaced the coil, leads and caps, still not firing. I checked the compression, which was fine, I checked the valve clearance (cylinder 4 the one intake valve was way out of spec, so i replaced the shim), still not firing. I've got no idea what else could be the problem or what to check next. PS. When i pulled the spark plugs(both new and old) they where burnt black so I'm not sure if my jetting could be out of spec perhaps?

Nov 20, 2019 | SPEC Motorcycles

See all 2003 Husqvarna CR 250 Questions

2003 Husqvarna CR 250 Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

richard libby

Level 2 Expert

209 Answers

Joshua Jennings

Level 2 Expert

85 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...