How to install 16 inch ape hangers. How do you change the cables?

Dave below are some vids. and instructions on how to.
press the helpful button

975 Handlebar Install

LA Choppers Prime Apes Installation Video


https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=video&cd=5&cad=rja&uact=8&ved=0ahUKEwiRjrWyjPXKAhXFsh4KHRs1CicQtwIINTAE&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3Dd9XK3Tlu0tk&usg=AFQjCNGRHAI4Z9xppvgElYvTZeGclmCYOw

How to Install Ape Hanger Handlebars Baggers

Either measure it with a tape measure or measure the standard bars then the height difference with you apes and add that to the standard cable length

None of my books give any torque specs for either the riser nuts/bolts nor the handlebar clamp bolts. Just use the tried and trusted "Germanic" method. "Gutentite". Use a bit of Loctite 242 med. strenght blue on the fasteners.

Good Luck
Steve

I usually use a piece of wire and tape it the original cable until the cable stops. Then, I run the wire on up to the clutch lever. Remove the wire and measure it.

Then go to Barnett's site and order the cable or see if they've got a "ready made" cable.
http://www.barnettclutches.com/products/custom_measuring_guide.aspx

Good luck
Steve

You will need to get longer throttle cables. You are putting them in a bind and that dangorus.
Heres a link that will help you out.
http://www.motionpro.com/

Try looking up Powersprtseast.com They have a parts fische you can use and though not in color itself may have colors labled on diagram for wiring harness.