SOLVED: Where are the spark plugs - 2002 Suzuki GZ 125 Marauder

0answers

HOT PLUGS FOR A 3.1 bUCK cENTURY

Read full answer

Be the first to answer Jul 27, 2017 • Cars & Trucks

0answers

Sonata spark plugs

Read full answer

Be the first to answer Apr 14, 2017 • Cars & Trucks

0helpful

1answer

Spark plug wiring diagram for a 2003 chevy malibu

SPARK PLUG WIRE REPLACEMENT (ENGINE CONTROLS - 3.1L)

Removal Procedure

Turn OFF the ignition.

Notice:

Remove the spark plug wires 2, 4, and 6 from the engine left side spark plugs.
Remove the spark plug wires from the retaining clips.

Remove the spark plug wires 1, 3, and 5 from the engine right side spark plugs.
Remove the spark plug wires from the retaining clip.

Remove the spark plug wires from the ignition coils.
Remove the spark plug wires from the engine.
If you are replacing the spark plug wires, transfer any of the following components:

Spark plug wire conduit
Spark plug wire retaining clips

Installation Procedure

Install the spark plug wires to the engine.
Install the spark plug wires to the ignition coils.

Install the spark plug wires 1, 3, and 5 to the engine right side spark plugs.
Install the spark plug wires to the retaining clip.

Install the spark plug wires 2, 4, and 6 to the engine left side spark plugs.
Install the spark plug wires to the retaining clips.

v\:* { behavior : url(#default#VML); position:absolute; } v\:* { behavior : url(#default#VML); position:absolute; }

Read full answer

Aug 20, 2014 • Vehicle Parts & Accessories

0helpful

1answer

Things you will need
Spark Plug Socket And Wrench of the correct size for your spark plugs

Basic Instructions.
Step 1
Locate your spark plugs
look for other obstructions besides your spark plug wires
if you have any other obstructions you will need to remove them as well to gain access to your spark plugs.
Step 2
Remove the spark plug wire for one single spark plug at a time.
this will insure you will not replace the wrond spark plug wire to the incorrect spark plug,
if not done this way you could change the firing order of your engine.
Step 3
With your spark plug Socket and wrench rotate the spark plug in a counter clock wise direction for removing.
Step 4
After you have removed your spark plug insert your new replacement spark Plug into your spark plug socket before inserting it into the correct location. spark plug sockets are made to hold on to the spark plug for easy removal and install.
Step 5
insert your new spark plug,
before you rotate your spark plug for tightening rotate the spark plug a 1 quarter turn in the counter clock wise direction, then start tightening the spark plug by rotating it in a clockwise direction
This will insure you will not strip the threads.
Step 6
Continue rotation your spark plug in the clock wise direction untill snug, then with just a lil more pressure tighten it up just a little more.
be sure to not put to much force on the spark plug after it has been snug, you just have to apply a little more pressure but not to much that could cause it to break.
Step 7
After tightening the spark plug replace the correct spark plug wire.
then move on to the next spark plug and follow the same instructions.

if you have any other visiable obstructions preventing you access for replacing your spark plugs you will need instructions on how to remove them parts. i have just instructed you on how to remove and reinstall the spark plugs only.

Read full answer

Feb 16, 2013 • 2008 Mazda Tribute

0helpful

1answer