There are three things that could be causing the problems you mention.
(1) You could have a bad four hole washer in your fuel petcock that is causing fuel flow issues. Rebuild or replace the petcock.
(2)You could be have issues with a sticking float needle or an incorrect float level (or sunk float). Clean the carburetor , check the needle for wear, check the float level measurement, see if the float sinks or floats in gas.
(3)You could have a bad gas cap (gas cap vent) that does not allow enough air into the tank fast enough when it is full. Replace the gas cap or unplug the vent in the cap.
579 views
Usually answered in minutes!
×