Lost my FOB I have a new one but I cant turn the alarm off, I called harley and they said to turn on the bike and immediatly push both left and right blinker buttons, Ive done this probably 30 times and it still wont go into the pin mode to turn it off?

The alarm will reset automatically or you can turn it off with the fob. If you cannot turn it off using the fob, then maybe the fob battery is flat. Replace it with a CR2032 and try again. If the alarm keeps ringing no matter what, then you may have a faulty TSSM module. All Harleys will reset the alarm if bike is turned off and left alone. By the way, have you removed the bike battery? If you have and did not disconnect it correctly (turn off alarm using fob, turn ignition on, disconnect battery) then the alarm siren will sound until its own backup battery goes flat. If this is the case, turn on ignition switch before fitting the battery.

With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike to start, this is now more important then ever. If the battery in your FOB dies and you have not set your Harley Alram Override PIN Code, you will not be starting your bike. It is just as important for those with oler Harley Davidsons with the push button alarm FOB. It you set your alarm and the battery dies before you return to your bike, again you will not be starting the bike.

If you haven't set the PIN over ride for your HD security alarm system...do it now! Here's how you do it...

(To view how to deactivate the security system with the manual PIN code, see below.)



Setting or Changing Your Security System Alarm Override PIN

Button less fobs (Smart FOB)

1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual.

2. With an assigned FOB present, turn IGN key ON - OFF - ON - OFF - ON

3. Press Left turn signal switch 3 times.

4. Press Right turn signal switch one time and release.
*Turn signals will flash 3 times. Current PIN will appear in the odometer. The first digit will be flashing.

5. Enter first digit (a) of the new PIN by pressing left turn signal (a) times.

6. Press right turn signal 1 time and release.
*The new digit (a) will replace the current in the odometer window.

7. Enter second digit (b) of the new PIN by pressing left turn signal switch (b) times.

8. Press right turn signal 1 time and release.
*The new digit will replace the current in odometer window.

9. Enter the third digit (c) of the new PIN by pressing left turn signal (c) times.

10. Press the right turn switch 1 time and release.
*The new digit (c) will replace the current in the odometer window.

11. Enter forth digit (d) of the new PIN by pressing left turn signal switch (d) times.

12. Press the right turn switch 1 time and release.

13. Enter the fifth digit (e) of the new PIN by pressing left turn signal (e) times.
*The new digit (e) will replace the current in the odometer window.

14. Press the right turn switch 1 time and release.

15. Before the module rearms, turn ignition key to OFF.
* The odometer will return to mileage display.
**Turning the ignition to OFF stores the new pin in the module.


Push Button fobs

1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual.

2. With an assigned FOB present, turn IGN key ON - OFF - ON - OFF - ON

3. Press Left turn signal switch 3 times.

4. Press button on fob twice
Current PIN will appear in the odometer. The first digit will be flashing.

5. Enter first digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

6. Enter second digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

7. Enter third digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

8. Enter forth digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

9. Enter fifth digit of the new PIN by pressing left turn signal until the desired number appears.
Press button on fob twice to enter number.

Turning the ignition to OFF stores the new security PIN.



Using the Security Alarm PIN Override to Start Your Harley Davidson

1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.

2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times.

3. Press the right turn signal switch 1 time to move to the next digit.

4. Enter the second digit of your PIN (b) by pressing the left turn signal switch (b) times.

5. Press the right turn signal switch 1 time to move to the next digit.

6. Enter the third digit of your PIN (c) by pressing the left turn signal switch (c) times.

7. Press the right turn signal switch 1 time to move to the next digit.

8. Enter the forth digit of your PIN (d) by pressing the left turn signal switch (d) times.

9. Press the right turn signal switch 1 time to move to the next digit.

10. Enter the fifth digit of your PIN (e) by pressing the left turn signal switch (e) times.

11. Press the right turn signal switch 1 time to move to the next digit.

12. Press the right turn signal switch one time and the security system alarm is turned off.

call a hd dealership to disarm the alarm . start there.

Hi there,

I bought my Harley with one key FOB but I have since lost it along a ride. Lucky I was able to set and change the code on the bike so I can still start the bike. I am wondering if there is a way to program a new FOB without having another one present?

Thanking you

Replace the batteries in the fobs. Or, if you know your security pin code, you can enter it my using the turn signal buttons.Turn the bike on and push in both turnsignal buttons at the same time until the red secruity lite begins flashing. Enter the first number of the code by pressing the left turn signal switch the same number of times as the first number of the code. Press the right turn signal switch once to advance to the next number of the code and use the left switch to enter the second number. Do this for all 5 numbers in the code. After all 5 numbers are entered, you can start the bike. If you don't know the code, take the bike to a Harley dealer and have them hook the bike up to Digital Technician and they can retrieve the code for you.

You should have code to input via turn sig s/ws you may need to swap your tssm for a tsm,,,

You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Set the alarm by holding the key fob button until you see running lights flash twice. Turn off the alarm by pushing the key fob button twice and the lights will flash once.