Start about 2 turns out.
while idling when you screw it in a bout half a turn the bike will begin to bog down (rich)
as you screw it out the revs will increase and become uneven(lean)
pick a point between the two where the idle is smoothest.
this setting can change with different engine tempuratures, and altitude
1,735 views
Usually answered in minutes!
whats the jet in the carb if it's a 155 to 160 then I use 2 1/4 turn out 165 to 170 I use 2 3/4 turns out make sure float height is right so you don't run it lean and what mods do you have on the bike
×