Question about Yamaha XT 125 R Motorcycles
Hi, Davide46_ros the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha Fault Codes
Yamaha XT 125R 2005 Service Information
OEM parts for Yamaha
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on May 27, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Turn the ignition on and hold the pass light button in when it says either endr or ntrd depending on whether your bike is an enduro (off road) or the other one (don't know the name).
Posted on Feb 08, 2010
Try this :--------
With the new battery connected the speedo should flash up enduro or motard. When it flashes from enduro to motard turn igniton on but dont start.
When it flashes again to enduro press the blue mode button on the front of the left handlebar. It should revert back to the correct mileage settings.-------------
----------------------- But if that is not helping, then you can reset the speedo.To reset speedo, remove the speedo connection and reconnect it after 5 minutes.This resets the speedo.To do this undo the two Allen bolts on the top of speedo whilst holding the nuts underneath then unclip the wire connector underneath speedo (lift little white tooth clip and pull) after you have removed the speedo for 5-10 minutes put it back on to the white clip turn the key into the central position (not starting the engine or to steering lock) then your speedo should be flashing endurance and motard depending on which you own (endurance being the "r" model and motard being the "x" model) when it flashes onto your type of bike turn on the ignition to the right and you should have the correct speed reading for your bike.----------- Also you can try this procedure :----------------- a much simpler way to change the display from enduro (the r model) to motard ( the x model) and vis versa, fisrt remove the seat by undoing the 2 allen key bolts near the back of the seat, then all you need to do is disconnect the battery for about 5 mins to reset the screen(always disconnect the negative first),then when you connect the battery back up the screen will say enduro and then notrd(this stands for morard) turn the key on and then when it flashes your model hold the mode button on the left handlebar(the little blue button) and then the screen will come to life and will say 125 and ethier notrd or enduro below the number 125, and this is the mode you have selected. ------------------ This will help.Thanks.Helpmech.
Posted on Apr 29, 2011
SOURCE: Engine wont start. on initial
Try this.---- Turn the ignition on and hold the pass light button in when it says either endr or ntrd depending on whether your bike is an enduro (off road) or the motard. ----------- Also click this link blow for more help:--- http://technoanswers.blogspot.com/2011/06/endr-then-ntrd-displays-on-yamaha-xt.html ----------- This should help.Thanks.Helpmech.
Posted on Jun 20, 2011
Tips for a great answer:
Jun 10, 2013 | 2009 Yamaha XT125R
Mar 04, 2017 | 2009 Yamaha XT125R
Oct 07, 2011 | 2008 Yamaha XT125X
Jun 17, 2011 | Yamaha XT 125 X Motorcycles
Apr 28, 2011 | 2006 Yamaha XT 125 X
Oct 14, 2010 | 2007 Yamaha XT 125 R
Jun 03, 2010 | 2006 Yamaha XT 125 X
Feb 05, 2010 | 2006 Yamaha XT 125 X
Jan 29, 2010 | 2007 Yamaha XT 125 R
Sep 25, 2009 | 2007 Yamaha XT 125 R
835 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: