2002 Honda CR 125 R Logo

Related Topics:

Posted on Dec 21, 2010

2002 Honda CR 125 R carburetor settings

What's the stock carb settings for my 2002 cr125r......my bike starts then shut off and seems really rich on a new top end

5 Related Answers

Anonymous

  • 83 Answers
  • Posted on Dec 07, 2008

SOURCE: i have a 2002 honda vtx 1800 will not idle but loads with gas

Check for a blocked airbox vent, sometime we put things under the seat that will cover the airbox inlet which will automatically make the bike run extremely rich and all that needs to be done is to remove the paper or gloves or whatever there is blocking the inlet snorkel. You may also want to check for tight intake valves too. That is classic Honda, tight valves will cause a rich mixture all the time if it is the intake valves making the problem.
Please let me know if this works, if not give me more specific data and I will better assist you.

Ad

Anonymous

  • 2 Answers
  • Posted on Jan 12, 2009

SOURCE: GAS MIXTURE CR 125

i would mix it 50/1 it will make your bike run a whole lot better

Anonymous

  • 4 Answers
  • Posted on Mar 20, 2009

SOURCE: Engine compression for 2002 125 CR Honda, 125lbs?

that sounds pretty decent, it is 7 years old so there will be less compression now than when new, obviously beacuse of wear. but 125lbs is good.

Anonymous

  • 10865 Answers
  • Posted on May 27, 2009

SOURCE: Honda CR 125 1997 wont idle

Your carberautor is either gummed up or needs to be adjusted. Begin by going to an auto zone or similar store and gatting a can of carb. cleaner that gets added to your gas. Be sure to follow the instructions on how much you add per gallon. let that run through your bike for a while and see where you are. If cleaning the carb. doesn't hellp, then the carb. will have to be adjusted.

Anonymous

  • 408 Answers
  • Posted on Jun 28, 2009

SOURCE: 98 cr 125 has spark and gas but wont start. seems

you should open the carb and check the floaters and the pin they control.Then adjust the float height and test it before you put it on the bike.Empty the gas from the engine 'cause it will damage the crankshaft's oil seals.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
2helpful
2answers

2000 Honda CR125 stock jet.

best thing go to a dealership in your area, they will advise you and the cost of a jet is very small.
0helpful
1answer

Cr125r 2001 cant start after changing piston and cylinder

hi mate you need to adjust the float if theres to much fuel going through you need to take the float out and adjust it to the manual specifications but remember slot the pin out and take the float out but watch the little valve which stops the fuel where the little valve is hanging from that is the part you need to adjust
0helpful
1answer

98 cr 125 has spark and gas but wont start. seems to be flooding the engine. gas is building up in the pipe. the carb doesn't seem to be controlling the flow of gas right

you should open the carb and check the floaters and the pin they control.Then adjust the float height and test it before you put it on the bike.Empty the gas from the engine 'cause it will damage the crankshaft's oil seals.
0helpful
1answer
1helpful
2answers
Not finding what you are looking for?

1,909 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...