Need locations in europe and asia for spares outlet and price for armature assy for hilti TE 2s drill - ( due to short in windings and comutator) purchased on 1981 from saudi arabia -

if the motor get hotter then normal this mean that the motor is coming to an end .
normally the armature or the coils of the motor starting to break down . but can be renewed , if the armature is broken that is the expensive part

I t will be poling or shorting out in the armature. Take it to a motor specialist but I think you will be up for either an armature or field windings.

Try http://www.hilti.com/holcom/page/module/home/home_dispatcher.jsf

I would bet the armature is shot for sure and possibly the field. When an armature shorts out it usually gives off excessive sparking from the brush area. When a field fails it will usually run very slow if at all.

At this site we do not sell parts, we help with technical solutions, if you need a price on parts I would suggest calling Hilti direct at 1-800-879-8000 for their pricing and the location of a dealer near you.

Yes. New bits will fit old Hilti drills. Old Hilti bits do not fit the new (last 15 years) Hilti drills.

that number sounds familiar, but I can't find a price I suggest going to Hilti.com and they have a store/dealer locator that you can call to get the par tthat you need. If you have any problems with call them at 1-800-879-8000 and they will be able to help.

Hilti should be able to provide you with them. If not contact a local motor repair outlet and find brushes the same size, they are very easy to change on the TE series.

Failing that Hilti offers a trade-in program for their tools.

ive checked the hilti website and theres no brushes avaiable
this is a link to the exploded diagram and parts listing
http://www.us.hilti.com/data/techlib/docs/tool_schematics/sfs/UH_240_A.pdf

it looks as though you would need to replace the motor
heres the link for it
http://www.us.hilti.com/holus/modules/prcat/prca_fuse.jsp?RANGE_OID=31634

hope this helps
if it does please vote

go here and request "tool repair form" to get your drill repaired.

http://www.us.hilti.com/holus/modules/home/home_submain.jsp?catname=/subhome/services