Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo
Posted on Jul 27, 2008

Hotpoint aquarius wd440g washer/dryer

My washing machine wont spin its making loud noises and reduce creases and dryer light is flashing im sure something is wrong with the spin!! Please can someone help because i cant afford to get it repaired and all my kids washing is inside it!!! Claire

  • adrianhyde78 Dec 07, 2008

    Does this mean the pump needs replacing or will clearing out the machine fix the pump?

  • mackenzie77 Jan 07, 2009

    how do you get the pump open?

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 57 Answers
  • Posted on Jul 28, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 15, 2008
Answers
57
Questions
0
Helped
28389
Points
97

Hi claire your problem is the pump braking down check to make sure there is nothing in the pump if you still cant get the door open pull the mains plug out and turn off the water valves red and blue take off the top of the machine and get a basin take the drain hose out and put it in the basin and bring the two down to the floor empty all the water out you should now be able to get the door open remember to check the pump and the bearings

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hotpoint WD440 washer/dryer wont control.when plugged in 4 lights flash and it goes to pump out . no switch has any effect. the lights flashing are the on/off ,drying high heat.reduced creases and time...

The NTC for the dryer is situated on top of the dryer heater box, fault can often be caused by a simple broken wire, they are very weak at this point.

its the sensor on the dryer

if you take off the top, its mounted on top of the dryer box, usually has a white plug with 2 black wires attached
1helpful
3answers

Hotpoint wf740 aquarius 1400 v noisy banging during spin = dust

It could be a broken drum restraint spring, or a worn or broken. or loose shock absorber.
To check the springs, remove the top cover, and you will see the springs.
Another possibility is the concrete weight could be broken or loose.
You need to remove the lower rear panel of washer to check the shockers and concrete weight.
Please rate my solution.
Thankyou.
3helpful
2answers

Hotpoint wf540 stopping on a rinse and spin and

check pump/filter/outlet hose for blockages. if ok, check pressure switch (disc shaped item at top of machine with 4? wires and a tube) by blowing into it gently - should hear clicks, then blow into tube to pressure chamber - should be clear.
1helpful
1answer

I have a hotpoint aquarius WF250 1500 spin. The

Hi,

I've just had this exact same problem. Can you tell me if you have had any success with fixing it please?

Thanks!

Dan
0helpful
1answer

Hotpoint Aquarius WD440G

Unplug the machine from the wall for 5 minutes, then plug it back in and try it again. If the lights come back, the control board needs to be replaced.
0helpful
1answer

On and off light and energy save and reduces creases lights flash

Hi Snarey, it sound like your door lock has passed away, you will need to make sure the appliance is unpluged, empty the water out of the drum, and check the vacuum switch which opperates the lock.
0helpful
1answer

Hotpoint wd44d wash/dryer wont finish a wash nor wont pump out

there may be something stuck in the pump itself. hairgrips and brawires are a common find.
9helpful
2answers

My hotpoint aquarius wd440 washing machine - flashing lights ?

I have a fairly new Hotpoint Aquarius machine (out of guarantee).
When it is switched on, all of the red lights flash and it will not operate.
Can you help please ??
15helpful
4answers

HOTPOINT AQUARIUS WF 250 ON/OFF LIGHTS FLASHING

The lights are set off by the balance sensors.And if your balance sensors are  stopping    it from spinning than you first have to make sure the washer is level.You  could have bad Shocks and a bad electronic control board,.                                    
0helpful
1answer

Hotpoint WD440G

I SWITH ON THE MACHINE AND F 01 APPEARS
Not finding what you are looking for?

248 views

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...