Hi and welcome to FixYa, I am Kelly n This product is powered by a 2-stroke engine and requires pre-mixed petrol and 2-stroke lubricant . Premix unleaded petrol and 2-stroke engine lubricant in a clean container approved for petrol. n This engine is certified to operate on unleaded petrol intended for automotive use with an octane rating 1 Litre + 2 0 ml = 2 Litres + 4 0 ml = 3 Litres + 60 ml = 50:1 (2%) 4 Litres + 80 ml =
First off the engine is designed to operate on unleaded fuel. The manufacturer makes no statements at all about E-10 Fuel. I will tell you from experience that you can use E-10 Fuel but.... should you ever have a warranty claim make sure the entire fuel system is 100% unleaded pre-mixed fuel. Your not going to hurt the unit using E-10 fuel as long as you maintain the proper fuel-oil mixtures. If anything a splash more of 2 stroke oil as in 22 mm / liter vs 20 mm. Or (+) 8 mm per gal.
Manufacturers statemenrts and recommended fuel mixtures below:
Thanks for choosing FixYa,
Kelly
of 87 ([R + M] / 2) or higher.
5 Litres + 100 ml =
The full operators manual is here:
http://www.screwfix.com/sfd/i/cat/pdfs/89/p4763889.pdf
743 views
Usually answered in minutes!
×