Hi, have an 86 honda goldwing interstate that wont engage. do you hve any ideas......it's a bike my dad left me and i would really love to ride it again......

Dot 3/4 brake fluid is added to the clutch master cylinder on the left handle bar. The left (clutch) handle bar lever is attached to the clutch master cylinder. To add fluid you will have to remove the phillips screws (4 x 12 oval screws) holding the cover on. Be sure to lay plastic over the motorcycle (with a towel or rags over that) to protect the bikes plastic and paint from any DOT 3/4 fluid you may spill during the filling or bleeding process. Caution: brake fluid will brittle and crack expensive Honda plastic.

Get It From HereGet It From HereGet It From HereGet It From HereGet It From HereGet It From HereGet It From Here

Six years is a long time and you are plrbably having a good time getting it going. My friend, I suggest you have the Honda Shop do a dune up on your machine before youtake it anywhere serious.

thanks for your question

Yes it has a water pump and it is inside the right crankcase cover. It is probably just fine. There is a thermostat that is probably stuck closed. The water can't circulate to cool the engine. Don't mess with the bike without a service manual. Google " motorcycle repair manuals honda ". Also the site below.

Please rate this answer. Thanks!

http://www.amazon.com/exec/obidos/ASIN/0892872381/vintageandcla-20