Question about 2004 Yamaha PW 50
Hi, guys, I have an 83 pw50. Can I use the new wiring harness for 88 - 07 as the connections for cdi, control unit and I think rotor is different. Otherwise, if I buy all components of the 88 harness can I plug n play Thanks. Carlin Ps 1983 Yamaha PW 50 is the model but it is not listed. @
Hi, Car_lind the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1983 Yamaha PW50 wiring diagram Google Search
Honda Motorcycle Wiring Diagrams
Yamaha PW50 Zinger Motorcycle 1985 1989 Full Service Repair Manual PDF... $18
YAMAHA PW50 A1 Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Feb 01, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 83 yamaha tt600e no spark
The CDI unit on the 83 model (TT600) is located under the fuel tank and suffers from heat
exposure.The solution is to get specialist help to open up the sealed CDI unit and repair/
replace internal connections (which are readily available electronic components)
When you re-install it put some heat shielding material there to protect it and this
will be OK as repair will utilise stronger parts,I think.
Later models have the CDI unit moved to the head-stem area.
(this info from a Non-mechanic who remembers what was done to his TT in Australia, many years
Posted on Jun 12, 2009
Hi, it may be 1 of 2 possible issues. 1st check your wires from the stater all the way to the spark plug and see if there is any fraying, splitting, burning,ect. especially under the gas tank, that would cause it to short out when wet. 2nd look around the carb. and see if the rubber intake is in good shape and sealed properly to make sure it isn't sucking in any water into the carb. which actually sounds more like the problem the higher you rev, the more water is getting in the motor.
Posted on Aug 23, 2009
No it will not work.
Posted on Oct 01, 2009
Testimonial: "Quick answer. Wish i knew why they won't work though, same year bikes and make other than mine is a vt500c the other is a vt500 both 1985."
Call your dealer with the first five figures in the number (3J5-00...,4XJ-01...,275-02...,etc) The dealer can look up on a microfiche exactly what year and model you have.Make sure the engine and frame numbers are the same(Yamaha does this) or you may have a motor from a different year.
Posted on Jun 17, 2010
Tips for a great answer:
Jun 29, 2018 | 2004 Yamaha PW 80
Oct 15, 2016 | 2006 Yamaha PW 50
May 18, 2014 | 2004 Yamaha PW 50
Apr 06, 2014 | 2004 Yamaha PW 50
Sep 28, 2013 | 2004 Yamaha PW 50
Sep 21, 2013 | 2004 Yamaha PW 50
Nov 24, 2012 | 2004 Yamaha PW 50
Sep 22, 2012 | 2005 Yamaha PW 50
Jun 25, 2012 | Yamaha PW 50 Motorcycles
Feb 16, 2010 | 2005 Yamaha PW 50
157 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: